Cam follower NSK FCRS-16

NSK FCRS-16 is a cam follower reference, within Bearings. Request a quote for FCRS-16 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The NSK FCRS series cam follower is a cylindrical roller bearing with an integrated stud, designed to work directly on cams, linear guides or raceways. Its compact, high-capacity design allows it to be mounted in mechanisms where space is limited and radial loads are demanding. It is used in automation, machine tools and handling equipment. If you need to replace it, send the complete part number and at MR Accesorios Industriales we will quote it.

The FCRS series designation is read by the number following the hyphen, which defines the roller size: FCRS-16, FCRS-19, FCRS-22, FCRS-26, FCRS-30, FCRS-32, FCRS-35 and FCRS-40 are the usual steps. That number is not a diameter or a width, but the size code that groups the standardized roller dimensions. The FCR series shares the family but with a different sealing or finishing configuration. To choose correctly, take the complete part number engraved on the roller and send it as is.

These rollers are found in cams of packaging machines, slide guides in machining centers, transfer systems in assembly lines and lifting mechanisms. In Argentina they are seen in the automotive industry, in food plants and in maintenance workshops that replace rollers worn by fatigue or lack of lubrication. They also appear in continuous motion equipment where the raceway is directly the cam surface.

To select the correct roller, take into account the outer diameter, width and shaft diameter, which must match the housing. Sealing is key: rollers with a seal prevent the entry of contaminants and the escape of lubricant. Check the internal clearance and alignment with the raceway; misalignment accelerates wear. Lubrication can be lifetime grease or relubricable depending on the model. If the cam raceway is marked, it should be checked before mounting the new roller.

Equivalences between brands are handled by dimensions and configuration: a roller from another firm with the same outer diameter, width and stud type can be interchanged, but always verify the load capacity and sealing. There is no universal table of equivalent part numbers; each manufacturer uses its own nomenclature. If you have another brand's part number or an unidentified part, send us the main measurements and we will indicate the compatible alternative.

To request a quote for your NSK FCRS series cam follower, send the complete part number by WhatsApp: FCRS-16, FCRS-19, FCRS-22, FCRS-26, FCRS-30, FCRS-32, FCRS-35 or FCRS-40. At MR Accesorios Industriales we will quote it promptly. If you need a variant with special sealing or a size you do not see, write to us with the exact model and we will quote it.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.