Cam follower NSK CRS-24

NSK CRS-24 is a cam follower reference, within Bearings. Request a quote for CRS-24 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The NSK CRS series cam follower is a roller bearing with its own stud, designed to be mounted directly on a cam, a guide or a raceway and to withstand radial loads with reciprocating motion. It is used where a compact, high-capacity contact wheel is needed, such as machine tools, packaging equipment, conveyors and cam mechanisms in general.

The CRS series designation is read with the number that follows the hyphen: CRS-8, CRS-10, CRS-12, CRS-14, CRS-16 and CRS-18 are the sizes in the family, and the -1 suffix distinguishes the variant with a sealing or stud configuration. Thus, CRS-8 and CRS-8-1 share the same size but are not the same execution, and the same applies to CRS-10 and CRS-10-1. By sending the complete part number, MR Accesorios Industriales quotes you the exact reference.

In Argentine industry they appear in cams of packaging machines, conveyor linear guides, feed mechanisms, presses and automation equipment. They are also found in the food and beverage industry, where washdown demands executions with good sealing, and in textile and woodworking machines that work with reciprocating motion and moderate to high radial loads.

To choose correctly, you must look at the outer diameter and the width of the contact raceway, the stud type and the mounting method, and above all the sealing: in environments with dust, chips or water, the variant with a seal is preferable. Mounting requires alignment with the cam or guide, correct stud tightening and adequate lubrication; poor alignment shortens the roller's life even if the load is as expected.

Cross-brand equivalences are handled by dimensions and roller type: an NSK CRS can be cross-referenced with references from other companies that share outer diameter, width and stud shape, but the part number does not always match. If you bring the part number of another brand or an unidentified part, at MR we cross-reference it and tell you the compatible alternative.

If you need a CRS cam follower for a cam, guide or conveyor, send the part number by WhatsApp to MR Accesorios Industriales: we'll quote it shortly. With more than 80 years in Buenos Aires, Argentina, we support the selection and mounting of bearings and power transmission components so that the machine keeps producing.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.