Insert bearing NSK ASS208-108N

NSK ASS208-108N is a insert bearing reference, within Bearings. Request a quote for ASS208-108N via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The NSK ASS series insert bearing is a ball bearing with a spherical outer ring and locking mechanism, designed to be mounted in split or solid housings. It is used in equipment where a simple and robust bearing unit is needed, such as conveyors, fans or agricultural machinery. MR Accesorios Industriales sells this series with the technical assistance your application requires.

The ASS series designation is interpreted as follows: the letters ASS identify the series of insert bearings with spherical outer ring and locking by set screws. The numbers that follow indicate the bore diameter and the locking type. For example, ASS201N corresponds to a bearing with a 12 mm bore and locking by set screws on the inner ring. Suffixes such as -008, -009 or -010 indicate bore diameter variants in inches or millimeters, depending on the standard. In ASS201-008N, the hyphen and the three digits indicate a specific bore size, while the final letter N indicates a particular insert configuration. Knowing these codes allows you to select the correct bearing for your equipment.

These insert bearings are used in a wide variety of industrial applications in Argentina. You will find them in belt conveyors, bucket elevators, mixers, fans, pumps, equipment for the food, textile, wood and agricultural industries. They are also used in machine tools and continuous process equipment. Their design allows them to be mounted in housings that facilitate alignment and quick replacement. MR Accesorios Industriales advises you to choose the right insert according to the load, speed and working environment conditions.

To select the correct insert bearing, take into account the shaft diameter, the type of load (radial, axial or combined), the rotation speed and the environmental conditions. Check the locking system: set screws are suitable for shafts with normal tolerances and moderate loads. If the environment has dust, moisture or chemical agents, consider versions with additional sealing. Mounting must ensure that the spherical outer ring seats correctly in the housing, allowing small misalignments. Proper lubrication and careful alignment extend the service life of the bearing.

On the market there are insert bearings from different brands that can be interchangeable with each other, as long as the main dimensions match: bore diameter, outside diameter, width and locking type. Equivalent series from other manufacturers usually follow similar designations, but it is essential to verify the dimensions and tolerances before replacing. If you have doubts, consult us with the original part number or the shaft and housing dimensions. At MR Accesorios Industriales we indicate the compatible alternative or quote the exact part number you need.

To request a quote for your NSK ASS series insert bearing, write to us on WhatsApp with the complete part number or the dimensions of your application. At MR Accesorios Industriales we will give you a response shortly and advise you so that you find the right solution.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.