Flange bearing 2 holes NSK ASRPF206-101

NSK ASRPF206-101 is a flange bearing 2 holes reference, within Bearing housings. Request a quote for ASRPF206-101 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The 2-bolt flange Y-bearing unit of the ASRPF series is an assembled unit that combines a cast iron housing with two mounting holes and an insert bearing with an extended inner ring. It is used to support rotating shafts on flat structures, where the mounting must be flush and the shaft can be offset relative to the flange. MR Accesorios Industriales sells this NSK line in Buenos Aires, Argentina, and quotes it by WhatsApp with the complete part number.

The ASRPF designation is read in parts: ASRPF identifies the 2-bolt flange housing with insert bearing, and the number that follows indicates the nominal shaft diameter in inches according to the series table. Suffixes with a hyphen, as in ASRPF201-008 or ASRPF202-009, correspond to variants of bore diameter or insert configuration within the same base size. Therefore, when ordering your unit, send the complete part number: ASRPF201, ASRPF202, ASRPF203 and ASRPF204 are some of the ones we sell.

These units appear in belt conveyors, packaging lines, food machinery, industrial washing equipment and ventilation systems. In Argentina they are found in milling plants, meat processing plants, tanneries and metalworking shops, where the flange is bolted to sheet metal or structural profile and the shaft is supported with freedom to rotate. The cast iron housing with two holes allows you to adjust belt or chain tension before tightening the bolts.

To choose well, take into account the shaft diameter, the insert locking type (set screw or eccentric) and the sealing required by the environment: dust, water or frequent washing. Assembly requires supporting the flange on a flat, clean surface, aligning the shaft with the bearing and tightening the bolts in a cross pattern. The insert lubrication comes from the factory; in service, follow the machine maintenance plan and check radial clearance if vibrations appear.

Insert bearing units are interchanged between brands by dimensional equivalence: shaft diameter, distance between holes, hole diameter and center height. If you bring an unidentified part or the part number from another brand, at MR Accesorios Industriales we will tell you the compatible alternative. The NSK ASRPF series crosses with equivalent lines from other manufacturers, but verification is always done with the housing and insert dimensions, not just the name.

If you need to replace a flange unit for your equipment, send us by WhatsApp the part number on the part or the shaft diameter and the distance between holes. We quote the exact part number you request and, if you are looking for a variant you do not see, write to us with the model: we will manage it so your machine keeps running. MR Accesorios Industriales, Buenos Aires, Argentina, more than 80 years supporting industry.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.