Insert bearing NSK AEL205-013W3

NSK AEL205-013W3 is a insert bearing reference, within Bearings. Request a quote for AEL205-013W3 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The NSK AEL series insert bearing is a ball bearing with an extended inner ring, designed to be mounted in split plummer block housings or pillow block units. It is used in equipment that requires a simple rolling unit, easy to mount and with good radial load capacity. MR Accesorios Industriales sells this series in Buenos Aires, Argentina, and helps you identify the exact size from the part number marked on the part.

The AEL series designation is read in blocks. The letters AEL identify the family of inserts with extended inner ring. The numbers that follow, as in AEL201W3 or AEL202-010W3, indicate the insert size: the first group is associated with the shaft diameter and the numeric suffix after the hyphen, when it appears, distinguishes size variants within that size. The W3 ending indicates a sealing configuration specific to the series. With the complete part number, such as AEL204-012W3, each reference is individualized.

These inserts are used in conveyors, belts, elevators, mixers, fans and process equipment in food, chemical and materials plants. In Argentina they are common in packaging lines, mills and agricultural machinery, where mounting on a split plummer block housing simplifies maintenance. They also appear in water treatment equipment and grain handling systems, provided the environment has dust or moderate moisture.

To select the insert, start from the shaft diameter required by the equipment and the type of housing where it will be seated. Check that the sealing is suitable for the environment: in the presence of fine dust or water, a tighter protection is advisable. During mounting, make sure the outer ring is properly seated in the housing and that the shaft has no burrs. Factory lubrication is usually enough for the service life, but under severe conditions it is advisable to check the condition of the lubricant.

AEL series inserts are interchangeable between brands according to size and locking type. If you have the part number from another brand or an unidentified part, send us the shaft and outer ring dimensions and we will indicate the compatible equivalent. The nomenclature does not need to match: what matters is the geometry and the shaft locking system.

If you need a quote for an AEL series insert, send the complete part number via WhatsApp to MR Accesorios Industriales. We will quote it shortly. If the part number does not appear, write to us with the shaft size and the housing type, and we will send you the corresponding reference.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.