NSK 6096 deep groove ball bearing
- Brand
- NSK
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Other brands in this category
Ask us about alternatives. Equivalence is verified for each reference and application.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
How to read NSK 6096
- 60Series
- Deep groove ball bearings, 60 series. For the same bore, each series has a different outside diameter and width.
- 96Bore
- 480 mm bore: 96 × 5.
6096 is the standard (ISO) basic designation: it defines the type, the series and the bore.
Description
The NSK 6096 bearing has a 480 mm bore, a 700 mm outside diameter and a 100 mm width (480 x 700 x 100 mm).
NSK 6096 is a reference of deep groove ball bearing, within Bearings. Request a quote for 6096 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The NSK deep groove ball bearings of this type have a basic designation, made up only of numbers, such as 602, 6204, 6908 or 60/630. They cover very different series and sizes, from very small bearings to large-diameter ones. What they have in common is the design; the dimensions change with each part number, which is why it must be given in full.
A deep groove ball bearing has one row of balls between two rings with deep raceways. This geometry allows it to support radial loads and also moderate axial loads in both directions, with low friction. It is the most widespread design in electric motors, fans, pumps, conveyors and all kinds of general-purpose machinery.
In the designation, the numbers identify series and size: two similar part numbers can have very different diameters or widths. For example, 6204 and 6214 share the first two digits, but not the dimensions. Part numbers with a slash, such as 60/630 or 69/600, and five-digit ones, such as 16001, are also part of this type and are identified by their full number.
When replacing a bearing, take the part number engraved on the ring. If it is not legible, measure the bore diameter, the outside diameter and the width. These three dimensions, together with the part number, confirm that it is the same bearing. Part numbers of this type carry no suffixes: they correspond to the basic designation of each bearing.
During mounting, apply force on the ring with the tight fit and never through the balls, use tools that seat evenly and avoid direct blows. Check the condition of the shaft and the housing, and lubricate according to speed, temperature and load, following the manufacturer's instructions.
To request a quote, write to us via WhatsApp or email with the full part number and the quantity. If you wish, add a photo or the dimensions of the bearing you are removing. We reply promptly, from Buenos Aires, Argentina.
Dimensions
Boundary dimensions of the basic designation 6096 per ISO 15: 480 x 700 x 100 mm (d x D x B).
- Bore
- 480 mm
- Outside diameter (D)
- 700mm
- Width (B)
- 100mm
The same size in other brands
Pages from other brands with the basic designation 6096: 480 x 700 x 100 mm (d x D x B) per ISO 15.
- RKB6096
They share the boundary dimensions set by ISO 15, not the technical data: seals or shields, internal clearance, cage and load rating can differ by brand and suffix. We quote each one by its full part number.
Frequently Asked Questions
- What are the dimensions of the NSK 6096 bearing?
- The NSK 6096 bearing has a 480 mm bore, a 700 mm outside diameter and a 100 mm width (480 x 700 x 100 mm). These are the standardised boundary dimensions (ISO 15) of the basic designation 6096.
- Are similar part numbers interchangeable?
- Not necessarily. Two similar part numbers can have very different dimensions. Check the full part number or the three main dimensions before replacing.
- What loads does a deep groove ball bearing support?
- It supports radial loads and moderate axial loads in both directions, with low friction. It is a general-purpose design for rotating machinery.
- What do I do if the part number is not legible?
- Measure the bore diameter, the outside diameter and the width, and send us those dimensions via WhatsApp or email together with a photo.