Single sprocket with hub, pitch 5/8", 16 teeth

MR Piñón simple 5/8" Z16 is a sprockets and gears reference, within Power transmission. Request a quote for Piñón simple 5/8" Z16 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The simplex sprocket 5/8" Z16 is a chain wheel supplied by MR Accesorios Industriales, designed to transmit motion in 5/8" pitch chains. It has 16 teeth and a hub, and is machined from SAE 1045 steel. It is used in power transmissions where a compact and sturdy gear is needed, and it is selected by chain pitch, number of teeth and type of shaft mounting. If you need to replace a worn sprocket or build a new drive, this model can be your starting point.

This item is a simplex sprocket with hub, 5/8" pitch and 16 teeth (Z16), supplied by MR in SAE 1045 steel. The designation Simplex sprocket 5/8" Z16 indicates that the chain driving it must be 5/8" pitch, that the wheel has 16 teeth and that its body includes a hub for mounting on the shaft. SAE 1045 material is a carbon steel with good machinability and strength, suitable for parts subjected to moderate stresses and contact wear.

Sprockets of this type are used in chain drives in agricultural machinery, conveyors, elevators, belts, mixers and transmission equipment in general. They also appear in implements and in production lines where a fixed transmission ratio and simple maintenance are required. Because it is supplied by MR, we can offer them with the hub and bore that best suit the available shaft, as long as the dimensions are confirmed before ordering.

To select a sprocket properly, take into account the chain pitch, the number of teeth, the shaft diameter and the type of fastening. The 5/8" pitch is a critical data point: if it does not match the chain, the gear will not work. The number of teeth defines the transmission ratio and the tangential speed; the fewer the teeth, the greater the stress on each tooth. The hub allows mounting on shafts of different diameters, but you must verify the bore, the key and the set screws or fastening screws.

If you need an equivalent sprocket or a nearby size, the most practical thing is to send us the part number MR-PINON-SIMPLE-5-8-Z16 or the data you have on hand: pitch, number of teeth, shaft diameter and type of hub. With that we can check whether there is an alternative in the same series or whether it is better to order a custom part. We can also advise you if the sprocket will run with an existing chain and you need to keep the original transmission ratio.

To request a quote for this simplex sprocket 5/8" Z16, send the part number by WhatsApp to MR Accesorios Industriales. If you have doubts about the pitch, the number of teeth or the mounting, write to us anyway: we will help you identify the correct part before ordering it. Because it is supplied by MR, we can adjust machining details according to your application, always within the dimensions we confirm together.