Single sprocket with hub, pitch 3/8", 95 teeth

MR Piñón simple 3/8" Z95 is a sprockets and gears reference, within Power transmission. Request a quote for Piñón simple 3/8" Z95 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The simplex sprocket 3/8" Z95 is a chain drive sprocket, with a central hub for shaft mounting. It is supplied in SAE 1045 steel and belongs to the 3/8" pitch series. It is used in mechanisms where speed reduction or torque multiplication is needed with a transmission ratio defined by the number of teeth. MR Accesorios Industriales supplies it in the country, with dimensional control on critical measurements.

This sprocket has a 3/8" pitch, 95 teeth and is manufactured in SAE 1045 steel. It is simplex with hub, meaning the teeth and the hub are a single piece and mounting is done directly on the shaft. The hub provides a support surface and allows fixing with a key or set screw depending on the equipment design. Since it is supplied by MR, the pitch diameter, thickness and concentricity between the teeth and the shaft housing are controlled.

It is used in 3/8" pitch chain drives where a specific ratio is required, such as chain conveyors, bucket elevators, packaging machines and material handling equipment. It also appears in synchronization mechanisms and in low-speed shafts with moderate loads. The number of teeth defines the ratio with the driving sprocket: the higher the number of teeth, the lower the output speed and the greater the torque available on the shaft.

To select correctly, check that the chain pitch matches the 3/8" pitch of the sprocket and that the number of teeth is compatible with the rest of the drive. Check the shaft diameter and the hub fixing system. During assembly, align the sprockets and tension the chain according to the equipment manufacturer's recommendations. Proper lubrication and correct tension extend the life of the teeth and reduce wear.

If you need a different size, we can supply a sprocket with another number of teeth, another hub diameter or a different pitch within the same series. For that, send us the current part number, the number of teeth, the pitch and the shaft dimensions. We can also evaluate replacement with an equivalent sprocket from another brand or from our own line, always respecting the critical dimensions of your machine.

To request a quote for this simplex sprocket 3/8" Z95 or inquire about a variant, write to us on WhatsApp with the part number MR-PINON-SIMPLE-3-8-Z95. We will respond shortly with the alternatives that best suit your equipment. MR Accesorios Industriales supplies power transmission components with more than 80 years of experience in the industrial market.