Single sprocket with hub, pitch 3/8", 43 teeth

MR Piñón simple 3/8" Z43 is a reference of sprockets and gears, within Power transmission. Request a quote for Piñón simple 3/8" Z43 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The simplex sprocket with hub, 3/8" pitch and 43 teeth is a sprocket that MR Accesorios Industriales supplies, intended to transmit motion in 3/8" pitch chains. Its integrated hub allows it to be mounted directly on the shaft with a keyway or set screw, without the need for additional bushings. It is used in low and medium speed drives where a smooth and quiet reduction is required.

This sprocket is designated as Simplex sprocket 3/8" Z43 and belongs to the 3/8" pitch series. Its main attributes are: pitch 3/8", 43 teeth, material SAE 1045 steel and type simplex sprocket with hub. The hub is the protruding central part that allows direct mounting on the shaft, with a bore diameter that is adjusted according to the requested size. SAE 1045 steel is a carbon steel with good machinability and strength, suitable for moderate power transmission.

It is used in a wide variety of industrial applications: chain conveyors, agricultural machinery, packaging equipment, lifting systems and machinery drives in general. Being a 43-tooth sprocket, it is common in transmission ratios where the speed of the driven shaft is to be reduced relative to the driving shaft. It is also used as an idler or return sprocket in long chain runs.

To select this sprocket correctly, take into account the chain pitch (3/8"), the number of teeth (43) and the diameter of the shaft where it is mounted. The hub allows it to be secured with a key or set screw, and it is important to verify alignment with the driving sprocket to avoid premature wear. If you need a different ratio, you can ask about other numbers of teeth available in the same series.

If you cannot find the exact size, we can look for another size within the line or suggest a compatible alternative. To do so, send us the part number MR-PINON-SIMPLE-3-8-Z43 or the full designation by WhatsApp. You can also tell us the pitch, the number of teeth and the required shaft diameter. At MR Accesorios Industriales we supply split plummer block housings, ANSI chains and pulleys, as well as bearings and power transmission.

To request a quote for this simplex sprocket 3/8" Z43, write to us by WhatsApp with the part number or the size you need. We will reply with the corresponding options. MR Accesorios Industriales, since 1945, has supplied Argentine industry with transmission and mounting components.