Single sprocket with hub, pitch 3/8", 16 teeth

MR Piñón simple 3/8" Z16 is a sprockets and gears reference, within Power transmission. Request a quote for Piñón simple 3/8" Z16 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The simplex sprocket 3/8" Z16 is an SAE 1045 steel chain sprocket with built-in hub, designed to transmit motion in 3/8" pitch chains. It is used in agricultural machines, conveyors and transmission equipment that require a specific transmission ratio. As it is supplied by MR, you can ask about variants and adaptations for your application.

This simplex sprocket with hub has a 3/8" pitch and 16 teeth (Z16). It is manufactured in SAE 1045 steel, a material with good mechanical strength and hardenability, suitable for continuous service. The hub allows direct mounting on the shaft with a keyway or similar fixing, without the need for additional bushings. Its single-strand design makes it suitable for single-chain drives, with simple alignment and reduced maintenance.

It is used in power transmission equipment such as conveyor belts, grain elevators, seeders, harvesters and industrial machinery in general. It also appears in roller movement systems, feeders and feed mechanisms where a moderate speed ratio is required. Due to its pitch and number of teeth, it is common in applications where a balance between speed and torque is sought, with low noise level and uniform wear.

To correctly select this sprocket, verify that the chain pitch matches 3/8" and that the number of teeth is suitable for the desired transmission ratio. Check the shaft diameter and the hub fixing system (keyway, set screw or flange). It is important to control the alignment between sprocket and chain, and to maintain adequate lubrication to extend the service life of the assembly. If you have doubts, ask us with your machine data.

If you need a sprocket with a different number of teeth, another pitch or a hub with special dimensions, we can get it. MR Accesorios Industriales has more than 80 years of experience in power transmission and supplies split plummer block housings, ANSI chains and pulleys, as well as bearings and seals from leading brands. To request an equivalent or a nearby size, send us the current part number, the number of teeth and the pitch; we will reply with the available alternative.

To request a quote for this simplex sprocket 3/8" Z16 or any other size, write to us via WhatsApp and send us the part number MR-PINON-SIMPLE-3-8-Z16. You can also ask about sprockets for other pitches and diameters. We advise you so that you find the part that best suits your equipment.