Single sprocket with hub, pitch 3/4", 60 teeth

MR Piñón simple 3/4" Z60 is a sprockets and gears reference, within Power transmission. Request a quote for Piñón simple 3/4" Z60 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

It is used to transmit motion in 3/4" pitch chains, with a hub that allows mounting on shafts and securing with screws or key. Its SAE 1045 steel design and 60 teeth make it suitable for transmission ratios where the goal is to reduce speed and increase torque in industrial machines and equipment.

This item is a simplex sprocket with hub, identified by part number MR-PINON-SIMPLE-3-4-Z60. Its construction data are: 3/4" pitch, 60 teeth (z) and SAE 1045 steel material. The designation "simplex" indicates a single row of teeth, and the hub is the central protruding part that allows mounting on the shaft. It is a power transmission component manufactured in-house by MR, so its geometry and finish meet the house standards.

Typical applications of a sprocket of this type include chain drives in agricultural machines, conveyors, elevators, mills and process equipment. With 60 teeth, it is used on the driven wheel or in ratios where speed must be reduced relative to the drive sprocket. It is also used in linear motion, dosing and synchronization mechanisms, provided the chain pitch is 3/4" and the space allows housing the outside diameter of the sprocket.

To mount and select correctly, verify that the chain pitch matches the 3/4" pitch of the sprocket and that the number of teeth is compatible with the desired transmission ratio. Check the shaft diameter and the hub fastening system (key, set screws or both). Check the alignment between sprocket and chain, and leave adequate tension to avoid premature wear. If the sprocket runs at high speeds, consider balancing and lubrication.

If you need an equivalent or a nearby size, the most practical thing is to send us the current part number, the number of teeth, the pitch and a photo or sketch with the main dimensions of the hub and the bore. With that data we can confirm whether we have an alternative in the same series or whether it is better to manufacture a custom part. We can also advise you on sprockets of other pitches or with a different number of teeth within our transmission line.

To move forward with the quote, send the part number MR-PINON-SIMPLE-3-4-Z60 by WhatsApp to MR Accesorios Industriales. If you have doubts about compatibility with your chain or mounting on the shaft, attach a photo of the assembly and the shaft dimensions. That way we can reply with the option that best fits your equipment.