Double sprocket with hub, pitch 5/8", 31 teeth

MR Piñón doble 5/8" Z31 is a sprockets and gears reference, within Power transmission. Request a quote for Piñón doble 5/8" Z31 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The double sprocket 5/8" Z31 is a chain wheel supplied by MR Accesorios Industriales, designed to transmit motion in 5/8" pitch chains. It has 31 teeth and a hub, and is made of SAE 1045 steel. It is used in power transmissions where two chain strands need to be driven or two chain rings mounted on the same shaft. If you need a different size, it can be quoted.

This item is a double sprocket with hub, 5/8" pitch and 31 teeth (z=31). The material is SAE 1045 steel, which gives it adequate strength for continuous service in chain transmission. The designation Double sprocket 5/8" Z31 identifies the part: the pitch indicates the chain it meshes with and the number of teeth defines the transmission ratio. The hub allows it to be fixed to the shaft with the appropriate fastening elements according to the assembly.

It is used in power transmission lines with 5/8" pitch chains, for example in conveyors, elevators, agricultural machinery, packaging equipment and movement systems in industrial plants. The double format with hub is common when power needs to be transmitted from the same shaft to two chains or when the drive capacity needs to be duplicated without changing the pitch diameter. It is also used as a replacement part in equipment that already has this standard pitch.

To select the sprocket, check that the chain pitch matches 5/8" and that the number of teeth is suitable for the desired transmission ratio. Check the shaft diameter and the type of hub fastening, and make sure the alignment between sprocket and chain is correct to avoid premature wear. During assembly, check chain tension and lubrication; a poorly tensioned or unlubricated chain shortens the life of the sprocket and the rest of the system.

If you need a sprocket with a different number of teeth, a different pitch or a different hub, in-house manufacturing of a close size or an equivalent can be evaluated. To do so, send the part number MR-PINON-DOBLE-5-8-Z31 or the full designation by WhatsApp, along with the chain and shaft data. With that information we review feasibility and provide the corresponding quote.

MR Accesorios Industriales supplies this type of sprocket and also provides bearings, housings, ANSI chains and pulleys. If your inquiry is about a size not listed on the site, write to us on WhatsApp with the part number or designation and we will guide you to find the right part. Our service is direct and technical, no runaround.