Double sprocket with hub, pitch 5/8", 15 teeth

MR Piñón doble 5/8" Z15 is a sprockets and gears reference, within Power transmission. Request a quote for Piñón doble 5/8" Z15 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The double sprocket with hub, 5/8" pitch and 15 teeth is a power transmission component used to drive two chains in parallel from a single shaft. Its hub allows it to be mounted directly on the shaft, and the 5/8" pitch makes it compatible with ANSI 40 chains. It is a part designed for equipment where two chain runs need to be synchronized with a single sprocket.

This item is a double sprocket with hub, manufactured by EMMAR in SAE 1045 steel, with 5/8" pitch and 15 teeth. The designation Double sprocket 5/8" Z15 indicates the chain pitch and the number of teeth. The hub is the central part that allows mounting on the shaft, and being double means it has two aligned toothed rings to drive two chains at once. It is used with 5/8" pitch chains, equivalent to the ANSI 40 series.

Typical applications of a double sprocket with hub appear in machines where motion must be transmitted to two chain lines in a synchronized way: double-chain conveyors, chain elevators, hauling equipment, feed and discharge systems, and transmission mechanisms in general. It is also found in agricultural implements and in production lines that need two chain runs with the same speed and relative position.

To select this sprocket correctly, take into account the chain pitch (5/8"), the number of teeth (15) and the shaft diameter where the hub is mounted. Check that the chain is compatible with the pitch and that the hub has the right bore and fastening system for your shaft. If the mounting requires a keyway, set screw or screw fastening, it is best to state this at the time of the inquiry so the part is prepared accordingly.

If you need a sprocket with a different number of teeth, a different pitch or a different hub, you can request an equivalent or a nearby size. To do so, send the part number MR-PINON-DOBLE-5-8-Z15 or the full designation by WhatsApp, along with the data of the shaft and the chain you are going to use. This way compatibility can be verified and you can be offered the variant that best suits your equipment.

If you want to request a quote for the double sprocket 5/8" Z15 or ask about a similar size, write to us by WhatsApp with the product part number and we will reply with the technical information you need.