Double sprocket with hub, pitch 3/8", 95 teeth

MR Piñón doble 3/8" Z95 is a sprockets and gears reference, within Power transmission. Request a quote for Piñón doble 3/8" Z95 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

It has 95 teeth and a double row with hub, and is machined in SAE 1045 steel. It is used in equipment where motion must be transmitted between parallel shafts with good wear resistance and precise chain alignment.

This item is a double sprocket with hub, 3/8" pitch and 95 teeth, manufactured by EMMAR in SAE 1045 steel. The pitch defines the chain it meshes with; the 95 teeth set the transmission ratio and the pitch diameter. The double row allows two chains to be mounted in parallel on the same hub, and the hub makes fastening to the shaft easier. It is a machined part, not a standard catalogue component: it is produced with the tolerances each application requires.

It is used in power transmission lines where speed must be reduced or torque multiplied with a 3/8" pitch chain. It appears in conveyors, packaging machines, lifting equipment and drag systems in industrial plants. It is also used as an idler or tensioner wheel in assemblies with two chain strands.

To select the sprocket correctly, check that the pitch matches the chain (3/8"), count the teeth of the sprocket you are replacing and check the shaft diameter and the hub fastening type. Alignment between sprockets is key: a difference of a few millimeters wears the chain and the teeth. If the assembly works with variable load, it is advisable to check the service factor and the lubricant. In SAE 1045 steel, surface resistance can be improved with heat treatment if the application requires it.

If you need an equivalent or a nearby size, send us the part number MR-PINON-DOBLE-3-8-Z95 or the full designation on WhatsApp. It also helps to send a photo of the part, the number of teeth, the pitch and the shaft diameter. With that data we check whether there is a variant in our manufacturing line or whether it is better to machine a custom part. We work with our own parts and with components from brands that MR supplies.

MR Accesorios Industriales manufactures this sprocket in SAE 1045 steel and quotes it according to the quantity and the characteristics of the assembly. To move forward, send the part number on WhatsApp and we will reply with the quote. If you have any doubts about the pitch, the teeth or the hub, ask us before ordering: that way you avoid assembly errors and buy the part your equipment really needs.