Double sprocket with hub, pitch 3/8", 29 teeth

MR Piñón doble 3/8" Z29 is a reference of sprockets and gears, within Power transmission. Request a quote for Piñón doble 3/8" Z29 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The double sprocket 3/8" Z29 is a sprocket supplied by MR Accesorios Industriales, designed to transmit motion in 3/8" pitch chains. Its double-row design with hub allows mounting on shafts and coupling two chains in parallel, something common in machines that need to synchronize movements or double the drive capacity. It is machined in SAE 1045 steel, a material that responds well to heat treatment and to the wear typical of continuous work.

This item is a double sprocket with hub, 3/8" pitch and 29 teeth, which MR supplies in SAE 1045 steel. The designation Double sprocket 3/8" Z29 indicates the chain pitch, the number of teeth and the double-row configuration with hub. The 3/8" pitch corresponds to light roller chains, widely used in low and medium power drives. The hub allows fastening the sprocket to the shaft with a key or set screw, depending on the equipment design.

Typical applications of a double sprocket of this type appear in belt or roller conveyors, packaging machines, material handling equipment and systems where two chain lines are needed working in parallel. It is also found in gearboxes and synchronization mechanisms that require a sprocket with two rings on the same body. Being made of SAE 1045 steel, it withstands moderate loads and accepts hardening or case hardening if the service is demanding.

To correctly select this sprocket, verify that the chain pitch is 3/8" and that the number of teeth matches the desired transmission ratio. Check the shaft diameter and the type of hub fastening, as well as the space available for the two rows. During mounting, align the rings with the chains and check the tension to avoid uneven wear. If the equipment works with variable load, it is advisable to evaluate additional heat treatment.

If you need an equivalent sprocket, the most practical thing is to send us the part number MR-PINON-DOBLE-3-8-Z29 or the data of the original part: pitch, number of teeth, shaft diameter and type of hub. With that information we will indicate the alternative in the same series or obtain a custom part. We can also advise you on the material and treatment according to the application.

To request a quote for this double sprocket 3/8" Z29, write to us by WhatsApp and send the part number MR-PINON-DOBLE-3-8-Z29. We will reply with the quote and the alternatives if you need a different number of teeth or a different pitch. MR Accesorios Industriales supplies power transmission, bearings and accessories for industrial maintenance.