Product page
Double sprocket with hub, pitch 3/8", 24 teeth
- Manufacturer Part Number
- Piñón doble 3/8" Z24
- Brand
- MROwn brand
- Category
- Power transmission
- Subcategory
- Sprockets and gears
- Series
- paso 3/8"
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
MR Piñón doble 3/8" Z24 is a sprockets and gears reference, within Power transmission. Request a quote for Piñón doble 3/8" Z24 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
The double sprocket with hub, 3/8" pitch Z24, is a power transmission component manufactured by EMMAR in SAE 1045 steel. It is used to transmit motion between parallel shafts by means of a 3/8" pitch chain, with two chain rings integral with a central hub that allows mounting on the shaft. It is a replacement part for equipment that works with this chain pitch and needs 24 teeth per wheel.
This item is a double sprocket with hub, 3/8" pitch and 24 teeth (z=24), made from SAE 1045 steel. The designation Double sprocket 3/8" Z24 indicates that it consists of two chain wheels of 24 teeth each, joined by a common hub, for 3/8" pitch chain. SAE 1045 material is a medium-carbon steel, suitable for machining and subsequent heat treatment according to the requirements of the drive.
It is used in 3/8" pitch chain drives where the output needs to be duplicated or two chain lines kept synchronized from the same shaft. It appears in light conveyors, packaging machines, material handling equipment and transmission mechanisms in general. The hub allows fixing the assembly to the shaft and transmitting torque to both chain rings integrally.
To correctly select this sprocket, check that the chain pitch is 3/8" and that the number of teeth (24) matches the desired transmission ratio. Check the diameter and length of the hub bore, the fixing system (key, set screw or bushing) and the distance between the two chain rings. The mounting must ensure alignment between sprocket and driven wheel to avoid irregular wear.
If you need a nearby size, a different number of teeth or a single sprocket instead of a double one, you can inquire with the part number MR-PINON-DOBLE-3-8-Z24 or by indicating pitch, number of teeth and type of hub. MR manufactures split plummer block housings, ANSI chains and pulleys, and distributes bearings, seals and power transmission, so alternatives within the same line can be evaluated.
To request a quote for this sprocket or ask for an equivalent, send the part number by WhatsApp to MR Accesorios Industriales. If you have doubts about the size, send a photo of the original part or the shaft and chain data. This confirms the appropriate variant before preparing the quote.
Dimensions
- Pitch
- 3/8"
- Teeth (z)
- 24
- Material
- SAE 1045 steel
- Type
- Double sprocket with hub
Frequently Asked Questions
- What does it mean that it is double with hub?
- It means it has two chain rings of 24 teeth each, joined by a central hub. That hub is the one mounted on the shaft and transmits motion to both wheels at the same time, allowing two chain lines from a single point.
- What chain pitch is it for?
- It is manufactured for 3/8" pitch chain. It is important that the chain and the driven wheel share that pitch for correct meshing. If your equipment uses another pitch, ask us about an alternative.
- Can I order a different number of teeth?
- Yes. MR manufactures sprockets and chain wheels, so a variant with a different number of teeth or a single sprocket can be evaluated. Send the pitch, the desired teeth and the shaft dimensions by WhatsApp.