Double sprocket with hub, pitch 3/4", 23 teeth

MR Piñón doble 3/4" Z23 is a sprockets and gears reference, within Power transmission. Request a quote for Piñón doble 3/4" Z23 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

It has 23 teeth and a hub, and is machined from SAE 1045 steel. It is used in power transmissions where two chains need to be driven in parallel or two ratios mounted on the same shaft. If you need a different size, custom manufacturing of a part can be evaluated.

This item is a double sprocket with hub, 3/4" pitch and 23 teeth (z=23), made from SAE 1045 steel. The designation Double sprocket 3/4" Z23 indicates the chain pitch, the number of teeth and the type of construction: two chain rings integral with a central hub, which allows it to be mounted on a shaft and transmit motion to two chains simultaneously. SAE 1045 material is a carbon steel with good machinability and strength, suitable for machined parts subjected to moderate loads.

Typical applications of a double sprocket with 3/4" pitch and 23 teeth appear in chain drive lines where the drive needs to be duplicated: belt or roller conveyors, bucket elevators, agricultural machinery, material handling equipment and transmission systems in which a single shaft drives two branches. It is also used when the direction of rotation of one of the chains needs to be reversed or when space requires concentrating two transmissions at the same point.

To correctly select this sprocket, take into account the chain pitch (3/4"), the number of teeth (23) and the shaft diameter where it is mounted, which must match the hub bore. Check the alignment between sprocket and chain, proper tensioning and lubrication. If the sprocket runs with a worn chain, it is advisable to replace both components to avoid premature wear. The hub allows fixing by key or set screw, depending on the equipment design.

If you need a sprocket with a different number of teeth, another pitch or a hub with special dimensions, we can manufacture it. Send us the part number MR-PINON-DOBLE-3-4-Z23 or the full designation by WhatsApp and we'll quote you. We can also evaluate an equivalent replacement if you send us the shaft dimensions, the chain pitch and the number of teeth of the original sprocket.

MR Accesorios Industriales manufactures this type of sprocket and other power transmission components. If you have doubts about compatibility with your equipment, write to us by WhatsApp with the product part number and the transmission data. We advise you so that you order the correct part.