Double sprocket with hub, pitch 1/2", 32 teeth

MR Piñón doble 1/2" Z32 is a reference of sprockets and gears, within Power transmission. Request a quote for Piñón doble 1/2" Z32 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

This double sprocket with hub, 1/2" pitch and 32 teeth, is a power transmission part that MR sells, made of SAE 1045 steel. It is used to transmit motion between parallel shafts by means of a chain, and its double-row configuration with hub allows it to be mounted on a shaft and secured with screws, without the need for additional hubs. It is an alternative for replacing single sprockets in applications where greater drive capacity is required or the chain line needs to be doubled.

The double sprocket 1/2" Z32 has a 1/2" pitch and 32 teeth, with an integrated hub. It is machined in SAE 1045 steel, a carbon steel with good machinability and strength, suitable for power transmission under normal service conditions. The designation "double" indicates that it has two toothed crowns in parallel, which allows it to work with two simultaneous chains or with a double-row chain, depending on the assembly. The central hub makes it easier to secure to the shaft by means of a key and set screws, and adds rigidity to the assembly.

This type of sprocket is used in chain transmission systems in agricultural machinery, conveyors, elevators, mixers and transmission equipment in general. It is common in applications where two movements need to be synchronized or the traction capacity needs to be doubled without adding a second independent sprocket. It is also used in machine tools and chain-driven equipment that require a specific transmission ratio with 32 teeth.

To correctly select this sprocket, verify that the chain pitch matches the 1/2" pitch and that the number of teeth is suitable for the desired transmission ratio. Check the shaft diameter where the hub is mounted and the fastening system (keyway, set screws). During assembly, align the crowns with the chain and verify the correct tension to avoid premature wear. Proper lubrication and periodic tension checks extend the service life of the assembly.

If you need a sprocket with a different number of teeth, another pitch or a different hub size, we can look for another size in the line or a compatible alternative. MR Accesorios Industriales sells sprockets, ANSI chains and pulleys. To request an equivalent, send us the part number or designation of the original sprocket, the number of teeth, the pitch and the shaft dimensions. With that data we will quote the part that best suits your equipment.

To request a quote for this double sprocket 1/2" Z32 or ask about a variant, write to us on WhatsApp and send us the part number MR-PINON-DOBLE-1-2-Z32. We will reply with the applicable options. You can also ask us about other transmission components: chains, pulleys, housings and bearings.