Double sprocket with hub, pitch 1/2", 114 teeth

MR Piñón doble 1/2" Z114 is a sprockets and gears reference, within Power transmission. Request a quote for Piñón doble 1/2" Z114 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The double sprocket 1/2" Z114 is a chain wheel supplied by MR Accesorios Industriales, designed to transmit motion in 1/2" pitch chains. Its hub design allows it to be mounted on shafts and coupled to other transmission components. It is used in agricultural machinery, conveyors and industrial equipment that require specific transmission ratios. Being made of SAE 1045 steel, it offers a strong base for machining and continuous use.

This item is a double sprocket with hub, 1/2" pitch and 114 teeth, in SAE 1045 steel. The designation Double sprocket 1/2" Z114 indicates that it has two toothed rings integral with a central hub, which allows two chains to be mounted on the same shaft or the transmission to be doubled. The 1/2" pitch corresponds to standard roller chains of that pitch, and the 114 teeth define a large-diameter wheel, typical of high reduction ratios. The hub facilitates anchoring to the shaft by means of a keyway or set screws, depending on the machining.

The most common applications of this type of sprocket include chain conveyors, bucket elevators, agricultural machines, mixers and transmission equipment where a low speed ratio is needed. It is also used in double-chain systems to synchronize movements or to distribute the load between two strands. Due to its robust construction, it is suitable for environments with dust, vibration and moderate loads, provided correct lubrication and alignment are carried out.

To select and mount this sprocket, check that the chain pitch matches the 1/2" pitch and that the number of teeth is compatible with the desired transmission ratio. The hub must have the appropriate shaft diameter and keyway; if it does not match, a bushing or adapter can be machined. It is important to align both rings with the respective chains and to control the tension to avoid premature wear. Periodic lubrication and concentricity checks extend the service life of the assembly.

If you need a sprocket with a different number of teeth, a different pitch or a hub with special dimensions, we can source it. MR Accesorios Industriales has more than 80 years of experience in power transmission and supplies housings, chains and pulleys, as well as bearings and seals. To request an equivalent or a nearby size, the most practical way is to send us the part number MR-PINON-DOBLE-1-2-Z114 or the data of the original part: pitch, number of teeth, shaft diameter and hub type.

To move forward with the quote, send the part number MR-PINON-DOBLE-1-2-Z114 by WhatsApp to MR Accesorios Industriales. If you have doubts about the size, attach a photo or a sketch with the main dimensions and we will help you identify the part. We can also advise you on the mounting and the appropriate lubrication for your application.