Double sprocket with hub, pitch 1/2", 10 teeth

MR Piñón doble 1/2" Z10 is a sprockets and gears reference, within Power transmission. Request a quote for Piñón doble 1/2" Z10 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The double sprocket 1/2" Z10 is a chain drive sprocket with two toothed rings and a central hub, supplied by MR in SAE 1045 steel. It is used to drive two chains in parallel from the same shaft, or to build simple reductions in low-speed equipment. Its 1/2" pitch and 10 teeth place it in the ANSI 40 chain range, typical of light conveyors, packaging machines and low-power manual or motorized drive mechanisms.

This item is a double sprocket with hub, 1/2" pitch and 10 teeth (z=10), machined in SAE 1045 steel. The designation Double sprocket 1/2" Z10 indicates that it is a part with two toothed rings integral to the same body and a central hub for mounting on the shaft. The 1/2" pitch corresponds to ANSI 40 roller chain, and the 10 teeth define a small sprocket, rotating relatively fast for its size. The hub allows it to be fixed with a key or set screw depending on the equipment design.

Typical applications of a double sprocket of this pitch appear in drives where two chain lines must be moved at the same speed: roller conveyors, small bucket elevators, packaging machines, screw feeders and manual drive equipment. It is also used as an output sprocket in simple gear reducers and in gate opening and closing mechanisms. Being made of SAE 1045 steel, it resists wear well in continuous service with adequate lubrication.

To select it, first verify that the chain pitch is 1/2" and that the number of teeth matches the desired transmission ratio. Check the shaft diameter and the type of hub fixing: keyway, set screw or both. During assembly, align both toothed rings with their respective chains, check the tension and lubricate with oil or grease compatible with roller chain. A small sprocket like the Z10 should be checked frequently for tooth wear.

If you need a nearby size, a single sprocket instead of a double, or a different pitch, send us the part number MR-PINON-DOBLE-1-2-Z10 or the full designation via WhatsApp. With the pitch, number of teeth and shaft diameter we can offer you the equivalent variant or source it to measure. MR Accesorios Industriales supplies split plummer block housings, ANSI chains and pulleys, so we can also advise you on the complete drive assembly.

To request a quote for this double sprocket 1/2" Z10, write to us via WhatsApp with the part number and the quantity you need. If you have doubts about compatibility with your chain or mounting on the shaft, send a photo or the equipment drawing and we will review it. At MR Accesorios Industriales we work with more than 80 years of experience in power transmission and can guide you so that the part goes into service without surprises.