MCGILL MCFR 62 SB cam follower

McGILL MCFR 62 SB is a reference of cam follower, within Bearings. Request a quote for MCFR 62 SB via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The MCGILL MCFR SB cam follower is a roller bearing with an outer profile optimized for direct contact on cams, raceways and linear guides. It is mounted on a shaft or stud and withstands radial loads combined with shock stresses, typical of drive mechanisms. Its sealed design retains lubricant and blocks contaminants, which makes it suitable for equipment with reciprocating motion or continuous rotation in demanding environments.

The MCFR SB series designation is read in parts: MCFR identifies the family of metric CAMROL cam followers, the number that follows indicates the roller size and the suffix SB indicates the variant with integral sealing. In the examples MCFR 13 SB, MCFR 16 SB, MCFR 19 SB, MCFR 22 SB, MCFR 26 SB, MCFR 30 SB, MCFR 32 SB and MCFR 35 SB, the number increases in steps and defines the outer diameter and the width of the raceway. When requesting a quote, send the complete code to identify the exact size.

These cam followers are used in drive cams, chain and belt guides, conveying systems, presses, machine tools and packaging equipment. In Argentine industry they appear in production lines, automotive assemblies, food plants and agricultural machinery factories. Their ability to absorb radial and shock loads makes them common in mechanisms where the cam rotates at moderate speeds and the contact raceway requires a hard, wear-resistant surface.

To select the correct cam follower, take into account the stud diameter, the expected radial load and the type of sealing required. The SB variant incorporates seals that protect against dust, chips and moisture, so it is advisable in contaminated environments. Verify the alignment between the cam and the roller: angular misalignment accelerates wear of the raceway and the seal. Lubrication must be adequate for the working temperature, and mounting must ensure that the roller rotates freely on its shaft without excessive axial play.

Cam followers are available from different brands with their own nomenclatures. Interchangeability is not automatic: you must compare outer diameter, width, stud diameter and length, type of sealing and load capacity. The MCGILL MCFR SB series is a metric reference, and other firms offer equivalents with different codes. If you need to replace a cam follower, send us the measurements or the original code and we will help you find the compatible option.

MR Accesorios Industriales sells the MCGILL brand. If you have the code of the cam follower you need, write to us via WhatsApp and we will quote you shortly. We can also advise you on the right variant according to the application.