Cam follower MCGILL MCFE 52A S

MCGILL MCFE 52A S is a cam follower and support roller reference, within Bearings. Request a quote for MCFE 52A S via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The McGill MCFE S series cam follower is a roller bearing designed to be mounted on a shaft and follow the profile of a cam or a rolling guide. It is used in mechanisms where the load is radial and the motion is reciprocating or in permanent contact. MR Accesorios Industriales carries this McGill metric line, with which you can replace worn components or equip new developments.

The MCFE S series designation is read in parts: MCFE identifies the family of metric cam followers, the number that follows —as in MCFE 22A S, MCFE 40A S or MCFE 72A S— indicates the roller size, and the letter A distinguishes the shaft or end variant. The final S indicates a sealed version, designed to retain lubricant and stop the ingress of contaminants. Each part number combines these variables, so the number and the letters are not interchangeable with one another.

These followers are used in actuation cams, linear guides, conveyors, packaging machines, continuous motion equipment and lifting systems. In Argentine industry they appear in production lines, food, metallurgical and plastics plants, where the roller works against a track and must withstand radial load with controlled wear. They are also found in automatic door mechanisms and handling equipment.

To select the right follower, take into account the outside diameter and the roller width, the shaft type —threaded or plain— and the sealing required according to the environment. Mounting requires aligning the shaft with the track and adjusting the clearance according to the equipment manual. Lubrication must be suitable for the load and rotation speed, and it is advisable to check the sealing if there is dust, chips or moisture. Poor alignment accelerates wear of the track and the roller.

McGill cam followers can be interchanged with those from other brands that use the same metric nomenclature, as long as the main dimensions and the shaft type match. It is not enough for the number to be similar: the diameter, width, sealing and thread must be verified. If the original part number is not available, the equivalent can be sought by measurements, but compatibility should be confirmed before mounting.

If you need a McGill MCFE S series cam follower, send the complete part number by WhatsApp to MR Accesorios Industriales. With the model —for example MCFE 26A S or MCFE 52A S— we will quote you shortly. You can also ask about other variants of the McGill metric line.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.