Cam follower MCGILL MCFDE 52 X

MCGILL MCFDE 52 X is a cam follower and support roller reference, within Bearings. Request a quote for MCFDE 52 X via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The McGill MCFDE series cam follower is a roller bearing with an integrated stud, designed to work in direct contact with cams, raceways or linear guides. It is mounted on machines where the load is high and the movement repetitive, such as presses, conveyors and automation equipment. MR Accesorios Industriales supplies this McGill line in Buenos Aires, Argentina, and helps you choose the correct part number for your application.

The MCFDE designation is read in blocks: the letters identify the McGill cam follower family, and the number that follows —35, 40, 47, 52, 62, 72, 80 or 90— indicates the roller size. The final X distinguishes the sealing variant or stud configuration. That is why, when you send the full part number, it is best to copy it exactly as it appears on the drawing or on the old part: MCFDE 35 X is not the same as MCFDE 40 X. If you have any doubts, send us a photo of the side and the stamped part number.

These followers are used in actuating cams, machine tool guides, chain conveyors, packaging equipment and reciprocating motion systems. In the Argentine market they appear in food, automotive and metalworking production lines, where repeatability and wear resistance are critical. They are also found in road and agricultural machinery operating with dust and vibration. The MCFDE series is designed for heavy loads and demanding cycles.

To select the correct follower, take into account the outside diameter, the roller width and the stud type. Sealing is key: in environments with chips or abrasives, a variant with a reinforced seal is advisable. Lubrication must be suitable for the rotation speed and working temperature. During mounting, verify alignment with the raceway and axial clearance; poor alignment shortens service life. Follow the manufacturer's instructions for tightening and securing the stud.

McGill cam followers are interchangeable with other brands that use similar designations, such as INA, SKF or NTN, as long as dimensions and load capacity match. It is not enough for the part number to look similar: you must compare the outside diameter, width, stud diameter and seal type. At MR Accesorios Industriales we can guide you on equivalences without inventing part numbers: send us the original reference and we will tell you which McGill option fits.

If you need to replace a McGill MCFDE series cam follower, write to us on WhatsApp with the full part number (for example, MCFDE 52 X) or a photo of the part. We will quote you shortly and advise you so that mounting is correct. MR Accesorios Industriales has more than 80 years supporting Argentine industry with power transmission and linear motion components.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.