MCGILL MCFD 47 cam follower

McGILL MCFD 47 is a reference of cam follower, within Bearings. Request a quote for MCFD 47 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The MCGILL MCFD series cam follower is a roller bearing designed to work directly on cams, guides and raceways. Its robust construction allows it to absorb high radial loads and shock forces in reciprocating motion mechanisms. It is used in equipment where precision and durability of the rolling contact are critical, and MR Accesorios Industriales sells it as part of its bearing line for industry.

The MCFD series designation is read by letters and number: MCFD identifies the McGill cam follower family, and the number that follows indicates the roller size within the series. That is why MCFD 35, MCFD 40, MCFD 47, MCFD 52, MCFD 62, MCFD 72, MCFD 80 and MCFD 90 coexist in the catalog: each code corresponds to a different outer diameter size. To choose, provide the full code shown on the drawing or on the original part.

These followers are used in drive cams, linear guides, conveyors, packaging machines, material handling equipment and lifting systems. In Argentine industry they appear in production lines, food plants, metallurgical plants and agricultural machinery factories, where the roller must rotate on a raceway and withstand lateral thrusts. They are also used in indexing devices and in opening and closing mechanisms that require reliable rolling contact.

To select the correct follower, take into account the outer diameter, roller width, type of stud or pin and mounting method. The MCFD series is mounted on a shaft or pin and works with the cam raceway as the rolling surface. Verify alignment between the roller and the raceway, axial clearance and lubrication: an adequate layer of grease and a seal that retains the lubricant extend service life. If the environment has dust or moisture, choose the sealed variant that best suits.

McGill cam followers are interchangeable with equivalent products from other brands when the main dimensions match: outer diameter, width, pin diameter and fastening type. It is not enough for the series number to be similar: the geometry and internal bearing type must be compared. If you have the original code, we cross-reference it with the corresponding reference and confirm the equivalence before quoting.

If you need the MCGILL MCFD series cam follower, send us the full code via WhatsApp along with a photo or the part drawing. At MR Accesorios Industriales we review the inquiry and respond shortly with the alternative that corresponds to your equipment. We can also advise you if you are looking for a variant of the same series that is not listed.