Cam follower MCGILL MCF 62A S

MCGILL MCF 62A S is a cam follower and support roller reference, within Bearings. Request a quote for MCF 62A S via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The MCGILL MCF A S series cam follower is a roller bearing with a threaded stud, designed to withstand radial loads in cam mechanisms and linear guidance systems. It mounts directly onto the structure through its threaded stud and a nut, and its outer race rotates on the rollers, allowing rolling contact with the cam or guide. It is a compact and robust solution for converting rotary motion into reciprocating motion or for guiding moving parts with low friction.

The MCF A S series designation reads as follows: MCF identifies the family of metric cam followers; the number that follows — as in MCF 22A S, MCF 40A S or MCF 72A S — indicates the roller size, and a higher number corresponds to a larger outer diameter and greater load capacity. The letter A distinguishes the stud variant and sealing configuration, while the final S indicates the presence of contact seals on both sides, which retain lubricant and block the entry of contaminants. The examples cover sizes from 22 to 72, always with the same construction logic.

These followers are used in machine tool cams, conveyors, presses, packaging equipment and guidance systems on production lines. In Argentina you will find them in the automotive, metalworking, food and material handling industries, where they perform rolling functions on cam tracks or support on rails. Their threaded stud facilitates mounting on plates and supports, and the outer roller race accepts significant radial loads in a reduced space.

To select the right follower, take into account the outer diameter and stud length required by your application, as well as the type of sealing: the S version with contact seals is the right choice when there is dust, chips or moisture. Mounting must ensure that the stud thread is perfectly perpendicular to the cam track; poor alignment accelerates wear. Lubrication is done through the stud duct or from the track, and it is advisable to follow the manufacturer's recommendations for grease type and frequency.

As for equivalences, metric cam followers from different brands can be interchanged if the main dimensions match — outer diameter, stud diameter and length, thread pitch — and the type of sealing. It is not enough for the designation number to be similar: the geometry and load capacity must be verified. If you need to replace an existing component, the safest approach is to compare the actual measurements or consult a specialist.

To request a quote for the MCGILL MCF A S series cam follower you need, write to us on WhatsApp with the complete part number — for example MCF 26A S or MCF 52A S — and we will reply shortly. MR Accesorios Industriales sells this brand backed by more than 80 years in the industry, and can advise you on the most suitable variant for your mechanism.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.