MCGILL CF 1 1/2 cam follower

McGILL CF 1 1/2 is a reference of cam follower, within Bearings. Request a quote for CF 1 1/2 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The McGill CF series cam follower is a roller bearing designed to follow a cam profile or travel along a guide, supporting radial loads and tilting moments. It is used in reciprocating motion mechanisms, conveyors and cam systems where precise, durable rolling contact is required. MR Accesorios Industriales supplies this line in Buenos Aires, Argentina, with technical advice to choose the correct designation.

The CF series designation is read as CF followed by a number indicating the nominal outside diameter in inches. For example, CF 1 corresponds to an outside diameter of one inch, while CF 1 1/2 indicates one and a half inches. Suffixes that may appear after the number refer to sealing variants, stud type or mounting configuration, and are interpreted according to the McGill catalog. If you have doubts about the code, send it to us and we'll verify it.

These cam followers are used in machine tool cams, transfer systems, lifting guides, presses, bottling equipment and internal transport. In Argentine industry they are found in automotive, metalworking and food production lines, where motion reliability is critical. Their robust construction absorbs combined loads and works in environments with moderate dust or humidity.

To select the right cam follower, consider the outside diameter, roller width, stud type and sealing. Lubrication must be as specified by the manufacturer and mounting requires precise alignment to avoid side loads. If the equipment operates at high speeds or impact loads, it is advisable to verify internal clearance and support rigidity. Incorrect mounting shortens bearing life.

McGill CF series cam followers can be interchanged with equivalent products from other brands, provided dimensions, load capacity and stud type match. A similar outside diameter is not enough: tolerances, material and heat treatment must be compared. At MR Accesorios Industriales we help you find the right equivalent without compromising equipment performance.

If you need a quote for a McGill CF series cam follower, write to us on WhatsApp with the complete code or the measurements shown on your equipment. We'll reply shortly with availability and the alternatives that best suit your application.