Cam follower MCGILL CCFE 1 3/8 SB

MCGILL CCFE 1 3/8 SB is a cam follower and support roller reference, within Bearings. Request a quote for CCFE 1 3/8 SB via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The MCGILL CCFE SB series cam follower is a roller bearing with a crowned outer profile, designed to run directly on cams, raceways or linear guides. Its robust construction and sealing make it suitable for oscillating motion and combined loads in industrial equipment. It mounts on a shaft or stud and is secured with a nut, which simplifies assembly and replacement. MR Accesorios Industriales supplies this line in Buenos Aires, Argentina, with technical advice to choose the correct variant.

The CCFE SB series designation reads as follows: CCFE identifies the family of McGill cam followers in inches; the number that follows, expressed in inches and fractions, indicates the roller outer diameter. For example, CCFE 1 1/2 SB corresponds to an outer diameter of 1 1/2 inches, while CCFE 1 1/4 SB and CCFE 1 1/8 SB are smaller sizes. The SB suffix indicates a construction variant within the series, generally linked to the type of sealing or the stud configuration. To confirm the exact interpretation of each code, it is best to consult with our technical team.

These cam followers are used in actuating cams, machine tool guides, conveyors, packaging equipment and reciprocating motion systems. In Argentine industry they appear in production lines, forklifts, presses and lifting mechanisms. Their ability to withstand radial loads and some axial thrust makes them versatile in applications where motion is not purely rotational. As a precision component, proper selection according to load and operating speed is key to extending the service life of the assembly.

To choose the correct cam follower, take into account the required outer diameter, the type of sealing and the environmental conditions. The CCFE SB series incorporates seals that retain lubricant and block contaminants, which is critical in dusty or humid environments. Mounting must ensure precise alignment with the raceway; excessive misalignment accelerates wear. Periodic lubrication with suitable grease and correct stud adjustment complete a reliable installation. If the equipment operates with impact loads, check the permissible load capacity.

As for equivalents, cam followers are identified by their outer diameter and configuration, but each manufacturer may vary in tolerances, sealing and load capacity. When replacing a component, do not rely only on the nominal size: also compare the stud type, roller width and sealing. The McGill CCFE SB series is a well-established reference, and alternatives from other brands on the market may not be directly interchangeable. Our team can help you evaluate compatibility before defining the replacement.

If you already have the code of the cam follower you need, send it via WhatsApp to MR Accesorios Industriales along with a photo or the drawing of the application. With that data we verify the available variant and quote you shortly. We can also advise you if you are developing a new mechanism and need to define the right series. More than 80 years of experience in industrial distribution allow us to respond with technical judgment and agility.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.