Cam follower MCGILL CCF 1/2 N S

MCGILL CCF 1/2 N S is a cam follower and support roller reference, within Bearings. Request a quote for CCF 1/2 N S via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The McGill CCF N S series cam follower is an inch-series roller bearing designed to be mounted on a shaft or stud and to follow the movement of a cam, a guide or a raceway. It is used where a sturdy support wheel is needed, with sealing and stud mounting, in reciprocating or traversing mechanisms. MR Accesorios Industriales supplies this McGill line in Buenos Aires, Argentina.

The series designation is read in blocks: the letters CCF identify the inch-series cam follower family, the number that follows indicates the nominal roller diameter, the N indicates the stud version and the S the seal type. That is why sizes such as CCF 1/2 N S and CCF 5/8 N S coexist: the roller diameter changes, not the logic of the series. To request a quote, send the full part number exactly as it appears on the drawing or in the mechanism.

In Argentine industry these followers appear in machine tool cams, conveyors, presses, packaging equipment, feeders and linear motion guides. They are also found in the metalworking and automotive sectors and in production lines where a cam roller must rotate on a raceway under radial load and hold the position of the mechanism. It is a wear part: when the raceway becomes marked or the roller loses clearance, it is replaced by part number.

To select correctly, look at the roller diameter, the stud type, the sealing and the internal clearance. The S sealing protects against dust and lubricant loss, which is key in environments with chips or dirt. During mounting, check the alignment of the stud with the raceway, the tightening of the fastening and that the cam does not strike the roller; poor alignment shortens the life of the follower more than the load does. Lubrication must be the one specified for the working temperature.

Across brands, inch-series cam followers are interchanged by part number and by dimensions: roller diameter, stud diameter and length, raceway width and seal type. It is not enough for the designation to look similar; the dimensional data sheet must be compared. If you have the original McGill part number or that of another brand, send it and we will cross-reference it with the CCF N S series to see the real equivalent.

If you need to replace a cam follower or add this line to a piece of equipment, write to us on WhatsApp with the part number, the roller size or a photo of the part. At MR Accesorios Industriales we reply promptly with the alternative that matches your mechanism.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.