Pillow block bearing LINK-BELT ZPS5208

LINK-BELT ZPS5208 is a pillow block bearing reference, within Bearing housings. Request a quote for ZPS5208 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

Link-Belt ZPS pillow blocks are foot-mounted units that house mounted bearings and allow rotating shafts to be fastened to a structural base. They are used to support and align shafts in transmission, conveying and process equipment. MR Accesorios Industriales supplies this line as an official brand and advises you on choosing the right housing according to shaft diameter, load type and working conditions.

The ZPS designation groups pillow blocks of the 5000 and 6000 series. The number that follows identifies the size and mounting variant: for example, ZPS5107, ZPS5108, ZPS5111 and ZPS5115 correspond to the 5000 series, while ZPS5200, ZPS5203, ZPS5207 and ZPS5208 belong to the 6000 series. Each code refers to an assembly with a built-in bearing, with standardized dimensions for the corresponding shaft diameter. To interpret the code correctly, note that the final digits may indicate the shaft diameter or the mounting type, depending on the series.

These housings are used in a wide variety of industries in Argentina: food and beverage plants, cement, steel, paper, mining, aggregate processing and material conveying systems. They also appear in grinding, mixing, ventilation and centrifugal pump equipment. Their foot design allows them to be mounted on flat bases or metal structures, with the possibility of aligning the shaft during installation. In applications with dust, moisture or frequent washdowns, it is advisable to evaluate the appropriate sealing and lubrication to extend the service life of the assembly.

To select the correct housing, consider the shaft diameter, the radial and axial load it must withstand, the rotation speed and the environmental conditions. Verify that the housing is compatible with the bearing you are going to mount and that the base has the necessary rigidity to prevent vibration. During mounting, ensure precise alignment between the housing and the shaft, and follow the manufacturer's instructions for bolt tightening and initial lubrication. Careful mounting reduces wear and prevents premature failures.

Link-Belt housings can be interchanged with those of other brands that follow the same dimensional standards, such as SKF, FAG, NTN or NSK, provided the shaft diameter, center height and mounting type match. In many cases, interchangeability is given by the series and size, but it is essential to verify the critical dimensions before replacing a housing. If you need a compatible alternative, at MR Accesorios Industriales we will indicate the option that best fits your equipment.

To request a quote for the ZPS housing you need, write to us on WhatsApp with the complete code or your equipment model. At MR Accesorios Industriales we reply promptly with availability and compatible alternatives. We can also advise you on the right bearing and mounting accessories. With more than 80 years of experience, we support Argentine industry with reliable technical solutions.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.