LINK-BELT ZFS5050MM flange bearing 4 holes

LINK-BELT ZFS5050MM is a reference of flange bearing 4 holes, within Bearing housings. Request a quote for ZFS5050MM via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

LINK-BELT ZFS MM series flange brackets are 4-bolt mounted units that combine an insert bearing with a flange housing, ready to be fixed directly onto a flat surface. They are used to support shafts in equipment where the mounting must be perpendicular to the support face, with simple alignment and good rigidity. MR Accesorios Industriales sells this line in Buenos Aires, Argentina, and advises you on choosing the correct size for your application.

The ZFS MM series designation is read in blocks: the letters ZFS identify the flange bracket family, the four digits that follow indicate the size, and the final letters MM correspond to the sealing and insert configuration variant. For example, ZFS5035MM, ZFS5050MM and ZFS5060MM share the 5000 series and differ in the size of the bearing they house. This numerical progression lets you quickly locate the size you need within the line.

These brackets are found in belt conveyors, bucket elevators, mixers, mills, pumps and process equipment. In Argentine industry they appear in food, cement, chemical, paper and aggregate processing plants, where flange mounting simplifies fixing onto existing plates or structures. Being mounted units, they reduce assembly time and the risk of mounting error compared to a loose bearing plus a separate housing.

To select the bracket, start from the shaft diameter and the load the assembly must support. Check that the 4-bolt flange matches the mounting surface and that the insert has the right sealing for the environment: dust, water or frequent washdowns require tighter protections. Lubrication must be the one specified for the insert and renewed according to the duty cycle. When mounting, seat the flange flat, tighten the bolts in a cross pattern and check shaft alignment to avoid lateral stresses.

The 5000 series flange brackets are interchangeable between brands according to shaft size, flange diameter and hole spacing. It is not enough for the size number to match: you must compare those three dimensions and the insert type. If you have the original code or the equipment dimensions, at MR Accesorios Industriales we will indicate the compatible alternative within the brands we sell.

If you need to replace a flange bracket, send us via WhatsApp the code on the part, the shaft size or a photo of the mounting. With that data we will quote the corresponding LINK-BELT ZFS MM reference and help you solve the application. MR Accesorios Industriales supports Argentine industry with power transmission components and bearings.