Flange bearing 4 holes LINK-BELT ZBS2204

LINK-BELT ZBS2204 is a flange bearing 4 holes reference, within Bearing housings. Request a quote for ZBS2204 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

LINK-BELT ZBS series flange housings are four-bolt mounted units that combine an insert bearing with a flange housing, ready to be fixed to a flat surface. They are used to guide shafts in equipment where mounting is done on a wall or vertical plate, with simple alignment and accessible maintenance. MR Accesorios Industriales supplies this line as an official brand and advises you on choosing the right variant according to shaft diameter and type of load.

The ZBS series designation reads as a code that identifies the size and configuration of the housing. The examples ZBS2111, ZBS2112, ZBS2115, ZBS2200, ZBS2203, ZBS2204, ZBS2206 and ZBS2207 show how the final number varies according to shaft diameter and type of fastening. Each reference combines the four-bolt flange with an insert bearing from the 2000 series, and the suffixes indicate particular features such as sealing or the shaft locking method. To correctly interpret each code, it is advisable to consult the manufacturer's equivalence table or write to us with the shaft size.

These housings are used in a wide variety of industries in Argentina. They are found in belt conveyors, bucket elevators, mixers, mills, centrifugal pumps and process equipment in food, chemical, cement and aggregate processing plants. They also appear in agricultural machinery, irrigation systems and material handling equipment. Their flange design allows them to be mounted on side walls of chassis or frames, where space is limited and firm fastening with four bolts is needed.

To select the right housing, take into account the shaft diameter, the type of load (radial, axial or combined) and the environmental conditions. Check the sealing: standard units usually have lip seals that retain grease and exclude dust and moisture; for environments with heavy dirt or frequent washdowns, there are variants with additional seals. Mounting requires a flat, clean surface, tightening the bolts in a cross pattern and aligning the shaft with the drive equipment. Lifetime or periodic lubrication depending on the type of insert also affects durability.

As for equivalences and interchangeability, four-bolt flange housings with a 2000 series insert bearing are interchangeable between different brands that make equivalent lines, as long as the flange dimensions, shaft diameter and locking system match. LINK-BELT is a recognized reference in the market, and MR Accesorios Industriales supplies this line as an official brand. If you need to replace an existing unit, the most practical approach is to identify the code stamped on the housing or measure the shaft and the hole spacing.

To request a quote for the LINK-BELT ZBS series housing you need, send us the full part number or the shaft and flange measurements by WhatsApp. At MR Accesorios Industriales we will reply promptly with the available reference and the compatible alternative if applicable. We can also advise you on mounting and lubrication so that the unit works under optimal conditions from day one.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.