LINK-BELT ZBS2111 flange bearing 4 holes

LINK-BELT ZBS2111 is a reference of flange bearing 4 holes, within Bearing housings. Request a quote for ZBS2111 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

LINK-BELT ZBS series flange bearing housings are four-bolt mounted units that combine an insert bearing with a flange housing, ready to fasten to a flat surface. They are used to guide shafts in equipment where mounting is done on a wall or vertical plate, with simple alignment and accessible maintenance. MR Accesorios Industriales sells this line and advises you on choosing the right variant according to shaft diameter and load type.

The ZBS series designation reads as a code that identifies the size and configuration of the housing. The part number examples show how the final number varies according to shaft diameter and mounting type. Each reference combines the four-bolt flange with an insert bearing from the 2000 series, and the suffixes indicate particular features such as sealing or the shaft locking method. To correctly interpret each part number, it is best to check the manufacturer's equivalence table or write to us with the shaft size.

These housings are used in a wide variety of industries in Argentina. They are found in belt conveyors, bucket elevators, mixers, mills, centrifugal pumps and process equipment in food, chemical, cement and aggregate processing plants. They also appear in agricultural machinery, irrigation systems and material handling equipment. Their flange design allows them to be mounted on side walls of chassis or frames, where space is limited and firm fastening with four bolts is needed.

To select the right housing, take into account the shaft diameter, the load type (radial, axial or combined) and the environmental conditions. Check the sealing: standard units usually have lip seals that retain grease and exclude dust and moisture; for environments with heavy dirt or frequent washdowns, there are variants with additional seals. Mounting requires a flat, clean surface, tightening the bolts in a cross pattern and aligning the shaft with the drive equipment. Lifetime or periodic lubrication depending on the insert type also affects durability.

As for equivalences and interchangeability, four-bolt flange bearing housings with a 2000 series insert bearing are interchangeable between different brands that make equivalent lines, as long as the flange dimensions, shaft diameter and locking system match. LINK-BELT is a recognized reference in the market, and MR Accesorios Industriales sells this line. If you need to replace an existing unit, the most practical approach is to identify the part number stamped on the housing or measure the shaft and the hole spacing.

To request a quote for the LINK-BELT ZBS housing you need, send us the full part number or the shaft and flange measurements by WhatsApp. At MR Accesorios Industriales we reply promptly with the available reference and the compatible alternative if applicable. We can also advise you on mounting and lubrication so that the unit works in optimal conditions from day one.