Flange bearing 4 holes LINK-BELT ZAF5110MMF

LINK-BELT ZAF5110MMF is a flange bearing 4 holes reference, within Bearing housings. Request a quote for ZAF5110MMF via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

Link-Belt housings of the 5000 series with the ZAF#MMF designation are 4-bolt flange mounted bearings. They are used to support rotating shafts on flat structures, with a flange that is bolted down and centers the assembly. MR Accesorios Industriales supplies this line as an official brand, with alternatives for different shaft sizes. If you need to replace an existing housing, send us the code stamped on the part and we will quote it.

The ZAF#MMF designation reads as follows: ZAF identifies the family of 4-bolt flange housings; the number that follows indicates the size, and MMF indicates the construction variant within the 5000 series. In the examples ZAF5060MMF, ZAF5065MMF or ZAF5100MMF, the numeric block changes according to the shaft size and load capacity. Not all numbers share dimensions: each code has its own shaft diameter, bolt hole spacing and mounting height. Therefore, to order the correct replacement, the complete code is the data that matters.

These housings appear in belt conveyors, bucket elevators, mixers, mills and process equipment. In Argentina they are found in food, cement, quarry and agro-industrial plants, where flange mounting solves the fastening on sheet metal or profile structures. The 4-bolt flange allows distributed fastening and simpler alignment than other mountings. Being mounted units, they simplify assembly because they integrate the bearing, the housing and the sealing into a single piece ready to install.

To select the housing, start from the shaft diameter and the flange dimensions: bolt hole spacing, hole diameter and overall height. Also verify the type of sealing the environment requires: a section with abrasive dust is not the same as one with frequent washdowns. During mounting, rest the flange on a flat, clean surface, tighten the bolts in a cross pattern and check shaft alignment before start-up. Correct lubrication and periodic retightening of the bolts extend the life of the assembly.

Flange mounted housings are available from several brands, and each manufacturer uses its own nomenclature for equivalent sizes. Interchangeability is not automatic: you must compare shaft diameter, bolt hole spacing, mounting height and type of sealing. Often the flange matches, but the sealing or load capacity changes. If you have the code of another brand, send it to us and we will indicate the compatible alternative from Link-Belt or another line we supply.

MR Accesorios Industriales supplies the Link-Belt line and other brands of bearing housings. If you need a ZAF#MMF to replace a worn unit, send us the complete code or the flange dimensions and shaft diameter via WhatsApp. We will quote you promptly and, if you are looking for a variant you do not see, write to us with the model you need: we will indicate the compatible alternative or manufacture it to measure.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.