Insert bearing LINK-BELT YG2E20NL*Δ■

LINK-BELT YG2E20NL*Δ■ is a insert bearing reference, within Bearings. Request a quote for YG2E20NL*Δ■ via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The LINK-BELT 200 series insert bearing is a ball bearing with an extended inner ring, designed to be mounted in split plummer block housings and wall units. It is used in equipment where the shaft rotates and needs support with flexible alignment, such as conveyor belts, mixers and fans. MR Accesorios Industriales sells this line as an official brand and advises you on choosing the correct variant for your application.

The 200 series designation is read in blocks: the letters YG identify the LINK-BELT insert family, the number that follows —20, 32— indicates the shaft diameter in inches or millimeters according to the catalogue, and the suffixes E, NL and the final symbols indicate design features such as locking type, sealing or tolerance. That is why two codes that look similar, such as YG2E20NL*Δ■ and YG2E32NL*Δ■, can differ in dimensions and application. It is always best to request a quote using the complete code.

In Argentine industry, these inserts are found in conveyors at grain, food and cement plants, in mixers, screens and process equipment. They are also found in road and agricultural machinery that works with dust and vibration. The 200 series is the most widespread for shafts up to approximately 2 inches, and its mounting in split plummer block housings makes maintenance easier without completely disassembling the shaft.

To select correctly, take into account the shaft diameter, the locking type —set screw, eccentric or adapter— and the sealing required according to the environment: dust, water or frequent washdowns. Factory lubrication is usually enough for several seasons, but in demanding applications relubrication should be scheduled. Check the housing alignment and axial play before tightening, and avoid striking the insert during mounting so as not to damage the raceways.

LINK-BELT 200 series inserts are interchangeable with other brands that use the same dimensional nomenclature, such as SKF, FAG, NTN or NSK, as long as the shaft diameter, inner ring width and locking type match. It is not enough for the code to be similar: dimensions and sealing configuration must be compared. If you have doubts, send us a photo or the code of the old bearing and we will indicate the compatible alternative.

MR Accesorios Industriales sells the LINK-BELT line as an official brand and can quote the insert you need. Write to us on WhatsApp with the code YG2E20NL*Δ■, YG2E32NL*Δ■ or the one shown on your equipment, and we will reply promptly with the variant suitable for your application.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.