LINK-BELT YBG220NL insert bearing

LINK-BELT YBG220NL is a reference of insert bearing, within Bearings. Request a quote for YBG220NL via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The LINK-BELT YBG series insert bearing is a ball bearing with an extended inner ring, designed to be mounted in split housings and wall units. It is used in equipment where the shaft rotates and needs support with alignment and sealing. MR Accesorios Industriales sells this line in Buenos Aires, Argentina, and helps you choose the correct part number for your application.

The YBG designation is read in blocks: YBG identifies the insert series with extended inner ring; the number that follows indicates the bearing size within the 200 series. The letters NL indicate the sealing and locking configuration, and the final symbols mark machining or groove variants. That is why YBG210NL and YBG219NL share a family but differ in dimensions and capacity. Send us the complete part number and we will quote the exact reference.

These inserts are mounted in split housings, wall units, take-up frames and idler pulleys. In Argentina you will find them in conveyor belts, mills, mixers, bucket elevators, washing equipment and treatment plants. Also in agricultural, food and material handling machinery, where the environment has dust, moisture or frequent washdowns. The 200 series is the medium-section one within LINK-BELT inserts, and the extended ring makes it easier to lock onto the shaft with a collar or set screws.

To choose well, look at the shaft diameter, the housing type and the sealing required by the environment. The NL suffix defines protection against contaminants; if there is water or fine dust, it is worth checking the seal type. During mounting, align the housing with the shaft before tightening, check axial clearance and lubricate according to the duty cycle. The insert should sit firm without forcing the outer ring. If the equipment vibrates, check the alignment and the condition of the housing before replacing.

As for interchangeability, 200 series inserts from different brands share basic dimensions, but the sealing, locking and tolerance suffixes change. Do not replace with a generic part number without checking the shaft diameter, the inner ring width and the locking type. LINK-BELT has its own nomenclature, and an equivalent reference from another company may not match in the seal or the groove. If you have doubts, send us the original part number and we will tell you the compatible alternative.

MR Accesorios Industriales sells LINK-BELT. If you need a YBG for replacement or for new equipment, write to us on WhatsApp with the complete part number —for example YBG212NL— and we will quote you shortly. We can also advise you on the right housing and sealing for your application.