Insert bearing LINK-BELT WBG2B08EL

LINK-BELT WBG2B08EL is a insert bearing reference, within Bearings. Request a quote for WBG2B08EL via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The LINK-BELT series 200 insert bearing is a ball bearing with an extended inner ring, designed to be mounted in split plummer block housings and wall or floor units. It is used in equipment where the shaft rotates and needs support with alignment and sealing. MR Accesorios Industriales supplies this line as an official brand and helps you choose the insert according to the housing and shaft diameter.

The series 200 designation is read in blocks: the initial letters identify the insert family, the numbers that follow indicate the size and the final suffix defines sealing or locking variants. For example, WBG2B08EL combines the series prefix, the size code and the sealing suffix. In practice, the complete code tells you which insert it is and which housing it is compatible with. If you have any doubts, send us the code exactly as it appears on the equipment and we will interpret it together.

These inserts are found in conveyors, bucket elevators, mixers, mills and process equipment. In Argentina they appear in food plants, cement plants, cold storage facilities and aggregate processing plants, where dust or moisture demand reliable sealing. They are also used in agricultural machinery and packaging lines. The series 200 is one of the most widespread for metric or inch diameter shafts, depending on the housing that receives it.

To select the insert, first look at the shaft diameter and the type of housing: split plummer block, floor or wall. Then check the sealing, because dust and water resistance depends on it. Internal clearance and lubrication are already defined at the factory, but mounting requires cleaning the seat, aligning the housing and tightening the screws evenly. Poor alignment shortens bearing life more than any other factor.

As for equivalents, series 200 inserts are interchangeable between brands if the shaft diameter, inner ring width and locking system match. It is not enough for the code to be similar: the housing dimensions and hole positions must be verified. At MR Accesorios Industriales we indicate the compatible alternative when you send us the original code and a photo of the housing.

If you need to replace a LINK-BELT series 200 insert, send us the code on WhatsApp. We will quote you shortly and, if necessary, indicate the compatible alternative. We can also advise you on the right housing and sealing for your application. With more than 80 years in the industry, at MR Accesorios Industriales we know the equipment used in Argentine industry and we help you keep the line running.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.