Insert bearing LINK-BELT WB2B08EL

LINK-BELT WB2B08EL is a insert bearing reference, within Bearings. Request a quote for WB2B08EL via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The LINK-BELT 200 series insert bearing is a ball bearing with an extended inner ring, designed to be mounted in split plummer block housings and take-up units. It is used in equipment where the bearing needs to be aligned and locked onto a shaft, with sealing that retains lubricant and blocks the entry of dust and moisture. It is a common replacement part in conveying, milling and industrial processes.

The 200 series designation is read in blocks: the initial letters identify the insert type and locking system, and the numbers that follow indicate the bore size. In WB2B08EL, the code starts with WB, continues with 2B and the number 08 that defines the shaft diameter; the suffix EL indicates the sealing and insert configuration variant. To order the replacement, simply provide the full code shown on the housing or on the old part.

These inserts are mounted in split plummer block housings, take-up units and wall units used in belt conveyors, bucket elevators, mixers, mills and process equipment. In Argentina they appear in food plants, cement plants, quarries, aggregate processing plants and packaging lines, where the environment has dust, moisture or frequent washdowns. They are also found in agricultural machinery and material handling equipment.

To select the insert, take into account the shaft diameter, the locking method on the shaft and the sealing required by the environment. The suffix EL defines a specific sealing configuration: verify it against the original part. During mounting, seat the insert in the housing without striking the outer ring, tighten the locking screws with the appropriate wrench and check shaft alignment before lubricating. Proper lubrication and periodic re-tightening extend the life of the assembly.

200 series inserts are interchangeable between brands according to bore size, locking method and sealing. Not all combinations are equivalent: an insert with a set screw does not replace one with an eccentric collar, and sealing changes performance in dirty environments. If the original code is not available, send us the shaft dimensions and a photo of the housing and we will indicate the compatible alternative.

If you need the LINK-BELT 200 series insert, send the code by WhatsApp to MR Accesorios Industriales. We will quote it shortly and, if you are looking for another variant of the series, write to us with the model you need. MR Accesorios Industriales sells LINK-BELT as an official brand and has more than 80 years of experience in Buenos Aires, Argentina.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.