Product page
Insert bearing LINK-BELT WB214EL
- Manufacturer Part Number
- WB214EL
- Brand
- LINK-BELTOfficial brand
- Category
- Bearings
- Subcategory
- Y-bearing (insert bearing)
- Series
- 200
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
LINK-BELT WB214EL is a insert bearing reference, within Bearings. Request a quote for WB214EL via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
The LINK-BELT WB EL series insert bearing is a ball bearing with an extended inner ring, designed to be mounted in split housings and wall units. It is used in equipment where the shaft rotates and needs support with alignment and sealing. Its design allows mounting on shafts with commercial tolerances and securing with set screws. MR Accesorios Industriales supplies this line for plants, workshops and maintenance in Buenos Aires, Argentina.
The WB EL designation is read as follows: WB identifies the insert series with extended inner ring; EL indicates the sealing type and locking configuration. The numbers in between, as in WB210EL or WB216EL, indicate the insert size within the 200 series. Thus, a WB210EL shares shaft and mounting dimensions with other inserts of the same family. To choose the correct one, send us the complete code that appears on the plate or on the housing.
These inserts are mounted in split housings, flange units and take-up frames. In Argentina they are found in conveyor belts, mills, mixers, bucket elevators, fans and plant equipment. Also in the food sector, where stainless steel housings with inserts of this type are preferred. LINK-BELT is a reference brand in power transmission, and MR Accesorios Industriales supplies it for the industrial market.
To select the insert, take into account the shaft diameter, the housing type and the working environment. The EL seal protects against dust and moderate moisture; if there are frequent washdowns or fine particles, additional protection is advisable. During mounting, verify that the shaft is clean and free of burrs, and that the set screws are properly tightened on the inner ring. Factory lubrication is sufficient for most cases; in demanding applications, follow the equipment maintenance plan.
200 series insert bearings are available in different brands with standardized dimensions. If the original code is not available, it can be replaced by another insert with the same shaft diameter and locking configuration, respecting the seal. At MR we indicate the alternative compatible with the code you send us. You do not need to have the original brand: with the part number or shaft dimensions, we quote the option that best suits you.
If you need a WB EL insert for your equipment, write to us by WhatsApp with the complete code or the housing model. We will quote you shortly and advise you so that the replacement is correct. MR Accesorios Industriales, Buenos Aires, Argentina.
This description provides guidance on the product type. Check the configuration and dimensions of this reference.
Dimensions
- Eje o agujero
- 7/8 in
Frequently Asked Questions
- What does the abbreviation WB EL mean in an insert bearing?
- WB identifies the insert series with extended inner ring, and EL indicates the sealing and locking type. The intermediate numbers, as in WB210EL, correspond to the size within the 200 series. Send us the complete code to quote the correct one.
- How does a WB EL insert differ from another of the same series?
- The difference is in the shaft diameter and the outer ring dimensions, which vary according to the number. The EL seal is maintained throughout the line. If your housing accepts an insert of another brand with the same dimension, we indicate the compatible alternative.
- How do I request a quote for a LINK-BELT insert bearing?
- Write to us by WhatsApp with the code that appears on the bearing or on the housing. If you do not have it at hand, send us the shaft diameter and a photo of the assembly. We will quote you shortly and confirm the option you need.