Insert bearing LINK-BELT W2B08EL

LINK-BELT W2B08EL is a insert bearing reference, within Bearings. Request a quote for W2B08EL via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The LINK-BELT 200 series insert bearing is a ball bearing with an extended inner ring, designed to be mounted in split plummer block housings and wall units. It is used in equipment where the shaft rotates and requires support with alignment and sealing. MR Accesorios Industriales supplies this line as an official brand, with options for different shaft sizes and locking configurations.

The designation W2B08EL is read in blocks: the initial W identifies the insert series, the 2 refers to the locking type, B indicates the shaft diameter and EL defines the sealing. In the 200 series, the number following the locking letter —such as 08— indicates the nominal shaft size in inches. To request a quote, send the complete code or the shaft size you need.

These inserts are mounted in split plummer block housings, flange units and take-up frames. In Argentina they are seen in conveyor belts, mills, mixers, centrifugal pumps and plant equipment. Also in agriculture, in seeders and harvesters, where dust and weather demand good sealing. The 200 series covers shafts of different sizes and is one of the most requested in maintenance.

To choose well, take into account the shaft diameter, the locking type —set screw, eccentric or adapter— and the sealing required according to the environment. Mounting requires cleaning the shaft, checking for burrs and aligning the housing before tightening. Correct lubrication and periodic re-tightening of the set screws extend the insert's life. If the equipment operates with vibration, check the play and the condition of the raceway.

The 200 series inserts are interchangeable between brands according to shaft size and locking type. LINK-BELT, SKF, FAG, NTN and Timken have equivalent lines, but seals and tolerances vary. Matching the diameter is not enough: verify the inner ring width and the adjustment system. If in doubt, send us the original code and we will indicate the compatible alternative.

To request a quote for your LINK-BELT 200 series insert bearing, write to us on WhatsApp with the code —for example W2B08EL— or with the shaft size and housing type. At MR Accesorios Industriales we will reply promptly with the option you need.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.