Insert bearing LINK-BELT UBG239NL*Δ■

LINK-BELT UBG239NL*Δ■ is a insert bearing reference, within Bearings. Request a quote for UBG239NL*Δ■ via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The LINK-BELT UBG 200 series insert bearing is a single-row bearing with an extended inner ring, designed to be mounted in split plummer block housings and wall or floor units. It is used where the shaft rotates and needs to be supported by a removable assembly that is easy to replace and align on site. MR Accesorios Industriales sells this line as an official brand, with more than 80 years supporting Argentine industry.

The designation of these inserts is read in blocks. The letters UBG identify the insert bearing family; the number that follows, as in UBG210NL, UBG211NL or UBG212NL, corresponds to the size within the 200 series. The NL suffix appears in all examples and distinguishes the sealing and locking variant of the insert. In larger sizes, such as UBG214NL, UBG215NL, UBG216NL, UBG218NL and UBG219NL, an additional letter is added before the end of the reference, indicating a different construction within the same series. Therefore, when ordering a replacement, it is best to provide the complete code and not just the number.

These inserts are found in belt conveyors, bucket elevators, mixers, screens, mills and continuous process lines. In Argentina they appear frequently in food plants, cement plants, ceramics, meatpacking plants and aggregate processing facilities, where the environment has dust, moisture or frequent washdown. They are also used in material handling equipment and in machines that run many hours per day, because mounting in a split plummer block housing allows the bearing to be replaced without dismantling the entire shaft.

To choose the right insert, first look at the shaft diameter and the housing where it will be seated: the insert must fit with the intended interference and be locked without axial play. Check the sealing type according to the environment: a section with abrasive dust is not the same as one with water or steam. Lubrication must be the one specified for the operating temperature, and mounting must be done with a clean shaft, free of burrs and well aligned with the housing. Poor alignment shortens insert life more than any other cause.

In the market, inserts from different brands with similar standard dimensions coexist, but they are not always interchangeable: the inner ring width, locking system, sealing and even the hole positions change. When you cannot find the exact reference, a compatible alternative can be evaluated by comparing critical dimensions and mounting style. At MR Accesorios Industriales we indicate the alternative that best fits your equipment and, if necessary, we manufacture it to measure.

If you have the insert code on hand, send it by WhatsApp along with the shaft diameter and a photo of the housing. With that we will quote the LINK-BELT reference or the equivalent option that solves your application. We handle inquiries from all over the country and respond promptly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.