LINK-BELT UBG226NL insert bearing

LINK-BELT UBG226NL is a reference of insert bearing, within Bearings. Request a quote for UBG226NL via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The LINK-BELT insert bearing is a single-row ball bearing with an extended inner ring, designed to be mounted in split housings and wall or pillow block units. It is used where a shaft rotates and must be supported with a removable assembly that is easy to replace and align on site.

The designation of these inserts is read in blocks. The letters UBG identify the insert bearing family; the number that follows corresponds to the size within the 200 series. The NL suffix distinguishes the sealing and locking variant of the insert. In the larger sizes an additional letter is added before the end of the reference, indicating a different construction within the same series. That is why, when requesting a replacement, it is best to provide the full code and not just the number.

These inserts are found in belt conveyors, bucket elevators, mixers, screens, mills and continuous process lines. In Argentina they appear frequently in food, cement, ceramic and meat processing plants and in aggregate treatment facilities, where the environment has dust, moisture or frequent washdowns. They are also used in material handling equipment and in machines that run many hours a day, because mounting in a split housing allows the bearing to be replaced without dismantling the entire shaft.

To choose the right insert, first look at the shaft diameter and the housing where it will sit: the insert must fit with the intended fit and be locked without axial play. Check the sealing type according to the environment: a section with abrasive dust is not the same as one with water or steam. Lubrication must be the one specified for the working temperature, and mounting must be done with the shaft clean, free of burrs and well aligned with the housing. Poor alignment shortens insert life more than any other cause.

Inserts from different brands with similar standard dimensions coexist on the market, but they are not always interchangeable: the inner ring width, the locking system, the sealing and even the hole positions change. When you cannot find the exact reference, a compatible alternative can be evaluated by comparing critical dimensions and mounting method. At MR Accesorios Industriales we will tell you the alternative that best fits your equipment and, if needed, we quote it to measure.

If you have the insert code at hand, send it on WhatsApp along with the shaft diameter and a photo of the housing. With that we will quote the LINK-BELT reference or the equivalent option that solves your application. We handle inquiries from all over the country and reply promptly.