Insert bearing LINK-BELT UB2M40NL*Δ■

LINK-BELT UB2M40NL*Δ■ is a insert bearing reference, within Bearings. Request a quote for UB2M40NL*Δ■ via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The LINK-BELT series 200 insert bearing is a ball bearing with an extended inner ring, designed to be mounted in split plummer block housings and wall or pillow block units. It is used in equipment where a rotating shaft must be supported while also allowing some misalignment and simple mounting. MR Accesorios Industriales supplies this line as an official brand for plants, workshops and maintenance in Buenos Aires, Argentina.

The series 200 designation is read in blocks. In UB2M17NL*■, UB2M20NL*■ or UB2M25NL*Δ■, the letters UB identify the insert family, the 2 corresponds to series 200, the M indicates the type of shaft locking and the number that follows —17, 20, 25, 30, 35, 40, 45 or 50— indicates the shaft diameter in millimeters. The NL suffixes and the final symbols distinguish sealing, groove or outer ring configuration variants. Send the complete part number via WhatsApp and we will indicate the exact variant.

These inserts are mounted in split plummer block housings, pillow block and wall units found in belt conveyors, bucket elevators, mixers, mills, centrifugal pumps and aggregate processing equipment. In Argentina they are common in food, cement, mining and chemical plants and in maintenance workshops that replace insert bearings on production lines and material handling equipment.

To select correctly, take into account the shaft diameter, the type of locking —set screws, eccentric or adapter— and the sealing required by the environment: dust, water or frequent washdown. During mounting, verify the housing alignment, the cleanliness of the shaft and the tightening of the locking screws. Proper lubrication and periodic regreasing extend the insert life. If the equipment operates with misalignment, the split plummer block housing absorbs part of that movement.

Regarding equivalents, series 200 inserts are interchangeable between brands according to shaft diameter, inner ring width and type of locking. It is not enough for the number to match: the outer ring shape, the groove position and the sealing must be compared. If you cannot find the LINK-BELT part number, write to us with the shaft measurement and the housing dimensions and we will indicate the compatible alternative.

MR Accesorios Industriales supplies the LINK-BELT brand as part of its line of bearings and housings. If you need to replace an insert on a stopped machine, send the complete part number —for example UB2M30NL*Δ■— or the shaft measurement via WhatsApp and we will quote it shortly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.