Insert bearing LINK-BELT UB2E20NL*Δ■

LINK-BELT UB2E20NL*Δ■ is a insert bearing reference, within Bearings. Request a quote for UB2E20NL*Δ■ via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The LINK-BELT 200 series insert bearing is a ball bearing with an extended inner ring, designed to be mounted in split plummer block, pillow block or flanged housings. Its design allows the shaft to be aligned and locked quickly, and it is used in equipment where a simple, robust and easy-to-replace bearing unit is required. MR Accesorios Industriales supplies this line as an official brand in Buenos Aires, Argentina.

The 200 series designation is read in blocks: UB identifies the insert type, 2 the diameter series, E the outer ring design, and the number that follows —20, 32— the bore size. The NL suffixes and the final symbols indicate sealing, locking or lubrication variants according to the manufacturer's catalogue. That is why, when requesting a replacement, it is best to provide the complete part number: UB2E20NL and UB2E32NL are examples of that nomenclature.

These inserts are mounted in split plummer block, pillow block or flanged housings, and they appear in conveyors, mixers, mills, pumps, fans and process lines. In Argentina they are seen in food, cement and chemical plants and in the field, on equipment that works with dust, moisture or frequent washdown. The 200 series covers a range of small and medium shafts, and it is commonly found in machines where a compact unit with simple maintenance is required.

To choose correctly, look at the sealing type: contact variants retain grease better and block the entry of contaminants, while lower-friction ones are suitable for higher speeds. Check the internal clearance and the type of shaft locking —set screw, eccentric or adapter— because the insert's ability to stay in place depends on it. During mounting, align the housing, lubricate before closing and tighten the screws evenly so as not to deform the outer ring.

Insert bearings are available from several brands in standardized sizes, and a part number from another manufacturer often matches the LINK-BELT one if diameter, width and locking type coincide. It is not advisable to rely only on the series number: the geometry of the outer ring and the sealing must be compared. If the original part number is not at hand, send us the shaft and housing dimensions and we will indicate the compatible alternative.

MR Accesorios Industriales supplies the LINK-BELT line in Buenos Aires, Argentina, and brings more than 80 years of experience in bearings and power transmission. If you need to replace a 200 series insert, write to us on WhatsApp with the part number UB2E20NL, UB2E32NL or the one shown on your equipment: we will quote it promptly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.