Take-up bearing LINK-BELT TH3S2E32E

LINK-BELT TH3S2E32E is a take-up bearing reference, within Bearing housings. Request a quote for TH3S2E32E via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The Link-Belt TH series tensioner bearing housing is a mounted unit that integrates a bearing with a housing designed to regulate the tension of chains or belts in industrial transmissions. It is used in equipment where the shaft must be able to move to compensate for stretch or wear, maintaining correct alignment and load. MR Accesorios Industriales supplies this line as an official brand, with alternatives for different shaft sizes.

The TH series designation is read in blocks: the initial letters identify the tensioner housing type, the first number indicates the housing size and the following ones the shaft size and mounting type. For example, TH3S2E20E corresponds to a size 3 tensioner bearing housing, for a 20 mm shaft, with mounting configuration E. The codes TH3S2E26E, TH3S2E32E and TH3S2E36E follow the same logic for 26, 32 and 36 mm shafts. Knowing this structure makes it possible to order the correct replacement without ambiguity.

In Argentine industry, these tensioner bearing housings appear in belt conveyors, bucket elevators, packaging belts and chain transmission lines. They are found in food, cement, mining and agro-industrial plants, where cleanliness and operational continuity are critical. They are also used in old machines that require replacements compatible with the original dimensions, a common scenario in the maintenance of equipment with decades of service.

To select the tensioner bearing housing, take into account the shaft diameter, the type of load (radial, axial or combined) and the environmental conditions. Sealing is key: in dusty or humid environments, protection that prevents the entry of contaminants is advisable. Lubrication must be the one specified for the internal bearing, and installation requires aligning the assembly with the transmission to avoid generating lateral stresses. The tensioner travel must remain free and be locked once tension is adjusted.

Link-Belt TH series tensioner bearing housings can be interchanged with units from other manufacturers that share the same critical dimensions: shaft diameter, distance between mounting holes and height to center. It is not enough for the code to be similar; the mounting drawing must be verified. MR Accesorios Industriales can indicate the compatible alternative if you send us the dimensions of the original equipment or a photo of the part.

If you need to replace a tensioner bearing housing, send us the full part number by WhatsApp. With that information, at MR Accesorios Industriales we will quote the corresponding unit or the alternative that best suits your application. You can also ask us about other sizes in the TH series or about housings for shafts with special dimensions.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.