Take-up bearing LINK-BELT TH3CL222N

LINK-BELT TH3CL222N is a take-up bearing reference, within Bearing housings. Request a quote for TH3CL222N via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The Link-Belt TH series take-up frame is a mounted bearing designed to maintain tension in belt or chain drive systems. It is installed on take-up shafts and return pulleys, where the belt or chain needs an adjustable support point. Its robust construction withstands moderate radial and axial loads, and its design allows mounting in different positions. MR Accesorios Industriales supplies this line as an official brand for industrial applications in Buenos Aires, Argentina.

The designation of these frames combines letters and numbers that identify the housing type and shaft diameter. In the TH series, the letters TH indicate the take-up frame with split housing; the number that follows (for example, 3) indicates the mounting type; CL corresponds to the mounted bearing series; and the following two digits (12, 14, 15, etc.) indicate the nominal shaft diameter in eighths of an inch. The final letter N identifies a seal variant. Thus, a TH3CL212N is a take-up frame for a 2-inch shaft (16/8) with a 200 series bearing and N-type seal. The examples cover from TH3CL212N to TH3CL222N, with shaft sizes ranging from approximately 1 1/2 to 2 3/4 inches.

These frames are used in belt conveyors, bucket elevators, conveyor belts and chain drive systems. They are common in food, cement, mining, port and aggregate processing plants. In Argentina, they are found in material handling equipment, mills and packaging lines. Their main function is to act as an adjustable take-up to compensate for belt or chain stretch and maintain alignment. They are also used on return shafts and idler pulleys.

To select the right frame, take into account the shaft diameter, load type (radial and axial), environmental conditions and lubrication method. The TH series accepts grease lubrication and requires effective sealing to prevent dust or moisture ingress. Mounting must ensure correct alignment between the frame and the shaft to avoid additional stresses. Fastening to the frame is done with bolts, and it is important to verify the tightening torque. If the equipment operates in corrosive environments, consider additional protections.

Link-Belt take-up frames are interchangeable with other brands that use similar designations, such as 200 series mounted bearings with take-up housing. When requesting a quote, it is essential to provide the complete part number and shaft dimensions to ensure compatibility. MR Accesorios Industriales can indicate the compatible alternative if you cannot find the exact model. Interchangeability depends on shaft diameter, mounting type and sealing, so it is always advisable to verify these data before replacing a component.

To receive a quote, send via WhatsApp the part number of the frame you need, for example TH3CL212N, or the shaft dimensions and application type. MR Accesorios Industriales replies shortly with technical and commercial information. If you are looking for a variant not listed, write to us with the model or features and we will advise you.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.