LINK-BELT TDS3U2M60N12 take-up bearing

LINK-BELT TDS3U2M60N12 is a reference of take-up bearing, within Bearing housings. Request a quote for TDS3U2M60N12 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The LINK-BELT mounted tensioner bearing is an assembly made up of a bearing, housing and seal, designed to support the shaft of tensioner pulleys in belt conveyors, bucket elevators and drive equipment. It is mounted on the tensioner shaft and handles rotation with lubrication and protection already handled at the factory. MR Accesorios Industriales sells this line in Buenos Aires, Argentina, and advises you on choosing the right variant for your equipment.

The designation of this line is read in blocks: TDS identifies the mounted tensioner bearing family, the U indicates the housing type and the letters and numbers that follow set out the shaft diameter, the bearing configuration and the sealing. In the codes of this series, the middle numeric block changes with the shaft size and the final suffix distinguishes mounting and protection variants. The additional symbols in the code refer to design options of the assembly. Send us the full code on WhatsApp and we will tell you which variant corresponds to your equipment.

These tensioners are used in belt conveyors in aggregate, cement and mining plants, in bucket elevators for grain and fertilizer, and in material handling equipment at ports and process plants. They also appear in conveyor belts in the food industry and in sorting lines where the tensioner shaft works under radial load and some misalignment. In the Argentine market they are in high demand for replacement of equipment already in service, and MR Accesorios Industriales quotes them with the exact mounting designation.

To select correctly, take into account the shaft diameter, the housing type and the sealing required by the environment: in areas with dust or washdown, a tighter protection is advisable. Check the alignment of the bearing with the pulley shaft and the available axial clearance, because a misaligned tensioner shortens bearing life. Lubrication must be the one specified for the working temperature and periodic regreasing keeps the assembly in condition. If the equipment has vibration or variable load, contact us and we will guide you on the right variant.

Interchangeability between brands of mounted tensioner bearings is resolved by shaft dimensions, housing type and locking configuration, not by each manufacturer's commercial code. Therefore, to switch from one brand to another, the safest approach is to compare the mounting drawing or send the full original code. MR Accesorios Industriales works with LINK-BELT and with other bearing lines, and will point you to the compatible alternative when the application allows it. You don't have to guess: send us the code and the shaft dimensions.

If you have the tensioner code at hand, message us on WhatsApp and we will send you a quote shortly. We can also help you identify the correct variant from the shaft dimensions, the bearing type and the working conditions of the equipment. MR Accesorios Industriales sells LINK-BELT in Buenos Aires, Argentina. Send your inquiry with the code or model you need and we will reply with the alternative that best suits you.