LINK-BELT SG2B08ELPA insert bearing

LINK-BELT SG2B08ELPA is a reference of insert bearing, within Bearings. Request a quote for SG2B08ELPA via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The LINK-BELT SG200ELPA series insert bearing is a ball bearing with an extended inner ring, designed to be mounted in split or pillow block housings. It is used in power transmission equipment where radial loads and some axial thrust must be supported, with the option of replacing the insert without changing the housing. MR Accesorios Industriales sells this line for industrial applications in Buenos Aires, Argentina.

The SG200ELPA series designation is read in blocks: SG identifies the family of inserts for housings, 200 corresponds to the dimensional size, EL indicates the sealing type and PA the outer ring configuration. A specific example is SG2B08ELPA, where the complete part number defines the shaft diameter and the mounting characteristics. To select the correct replacement, send the complete part number shown on the housing or on the original insert.

These insert bearings are used in belt conveyors, bucket elevators, mixers, mills, industrial washing equipment and agricultural machinery. In Argentina they are common in food plants, cement plants, quarries and agro-industrial facilities, where the environment often has dust, humidity or frequent washdowns. The SG200ELPA series is designed for those conditions and allows the equipment to keep running with a simple insert replacement.

To choose the insert, check the shaft diameter, the locking type (set screw, eccentric or adapter) and the sealing required according to the level of contamination. Mounting requires cleaning the housing bore, aligning the shaft and tightening the set screws with the proper wrench. Factory lubrication is usually sufficient for the service life, but in severe environments it is advisable to check the condition of the seals and relubricate if the equipment allows it.

Insert bearings from different brands can be interchanged if the main dimensions match: shaft diameter, outer ring diameter, width and locking type. Equivalent series from other manufacturers usually have different trade names, so the comparison must be made with the data sheet or the original part number. MR Accesorios Industriales will tell you the compatible alternative if you cannot find the exact reference.

If you need a quote for a LINK-BELT SG200ELPA series insert bearing or its equivalent, send the complete part number by WhatsApp to MR Accesorios Industriales. You can also ask about split plummer block housings, pulleys and ANSI chains that we manufacture. We will reply shortly with the technical information and the corresponding quote.