Pillow block bearing LINK-BELT PT3S2B08E

LINK-BELT PT3S2B08E is a pillow block bearing reference, within Bearing housings. Request a quote for PT3S2B08E via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The LINK-BELT 200 series pillow block is the mounting unit that houses an insert bearing and secures it to the structure through two holes in the base. It is used to support transmission shafts in conveyors, elevators, mixers and process equipment, where rigid support and simple alignment are required. MR Accesorios Industriales supplies this line as an official brand in Buenos Aires, Argentina.

The designation of these pillow blocks is built in blocks: the initial letters identify the unit type, the 200 series defines the family of insert bearing it houses, and the following digits indicate the shaft diameter and the housing configuration. A code such as PT3S2B08E is read from left to right: pillow block type, series, shaft size and sealing or locking variant. With that data the unit is identified unambiguously.

In Argentine industry they appear in belt and chain conveyors, bucket elevators, mixers, screens, mills, pumps and fans. Also in food, cement, aggregate and water treatment plants, where the pillow block allows the shaft to be mounted on a flat base and absorbs moderate radial and axial loads. They are a common solution when the shaft runs parallel to the machine base.

To select correctly, take into account the shaft diameter, the load type and the mounting position. Check that the base seats without deforming, that the holes match the baseplate and that the shaft is aligned with the drive equipment. The sealing of the insert defines the protection against dust, water or washdowns; lubrication and internal clearance are chosen according to the operating speed and temperature. Careful alignment during mounting extends the life of the assembly.

Pillow block units are interchangeable between manufacturers when the shaft diameter, the center height, the distance between holes and the insert type match. In practice, a complete unit is replaced with another of the same configuration, or only the insert bearing is changed if the housing is in good condition. It is always advisable to compare the mounting dimensions before replacing one unit with another of different origin.

If you need to replace a pillow block, send the complete code by WhatsApp to MR Accesorios Industriales. With the model or the shaft and base dimensions we will quote the unit and indicate the compatible alternative within the LINK-BELT line. We also advise on the insert, sealing and lubrication so that the mounting is properly resolved.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.