LINK-BELT PT3CL218N flange bearing 2 holes
- Brand
- LINK-BELT
- Category
- Bearing housings
- Subcategory
- Bearing housings
- Series
- 200
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
LINK-BELT PT3CL218N is a reference of flange bearing 2 holes, within Bearing housings. Request a quote for PT3CL218N via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The Link-Belt 2-bolt flange bearing is a mounted bearing ready to be fastened to a flat surface with two bolts. It is used to support shafts in equipment where the mounting must sit flush with a wall or structural sheet metal, with simple alignment and accessible maintenance. MR Accesorios Industriales sells this line with technical advice to choose the correct size according to the shaft diameter and working conditions.
The designation of these housings is read in parts. PT indicates the flange housing type; the number that follows corresponds to the nominal shaft diameter in inches. CL identifies the mounted bearing series, and N the locking or sealing type. The 200 series groups the medium-duty sizes.
These housings are found in belt and screw conveyors, bucket elevators, mixers, blowers, centrifugal pumps and process lines in food, chemical and aggregate processing plants. In Argentina they are found in sugar mills, meatpacking plants, feed mills and logistics warehouses, where the two-bolt flange simplifies mounting on steel structures or masonry.
To select the housing, start from the shaft diameter and the load type: predominantly radial in conveyors, with some axial load in screw flights and blowers. Check that the flange has room for the bolts and that the mounting surface is flat and clean. During mounting, align the shaft with the housing before tightening, lubricate according to the seal type and check radial clearance. A slight misalignment is compensated by the spherical seat of the bearing, but it is best to correct it so as not to shorten service life.
Link-Belt housings are interchangeable with other brands of two-bolt flange mounted bearings that follow the same dimensional standard. The key is to compare shaft diameter, hole spacing, bolt diameter and center height. If the original code does not match, it can be replaced by an equivalent from another brand while keeping those dimensions. MR Accesorios Industriales will indicate the compatible alternative or, if necessary, have it made to measure.
If you need a flange housing for your equipment, send the code or model via WhatsApp to MR Accesorios Industriales. We will quote it shortly and advise you so that the part fits without rework. We can also review the complete assembly — bearing, housing and seal — so that the replacement is the correct one.
Dimensions
- Bore
- 1 1/8 in
Frequently Asked Questions
- How do I choose the flange housing for my shaft?
- Measure the shaft diameter and the distance between the flange holes. With that data and the equipment code, we will indicate the corresponding model from the 200 series. If it does not match any code, we will look for the compatible alternative.
- Can a housing from another brand be replaced by a Link-Belt one?
- Yes, if the shaft diameter, hole spacing, bolt diameter and center height match. The series follows interchangeability standards, so it can generally be replaced by an equivalent from another brand.
- What maintenance does this type of housing need?
- Check the seal and lubrication from time to time, and make sure the shaft does not have excessive radial play. If the housing works in a dusty or humid environment, choose a more closed seal and lubricate as often as the equipment manufacturer indicates.