LINK-BELT PL3U2M60N pillow block bearing

LINK-BELT PL3U2M60N is a reference of pillow block bearing, within Bearing housings. Request a quote for PL3U2M60N via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The LINK-BELT pillow block is a mounted bearing designed to support rotating shafts in industrial equipment. It is used when a compact unit with self-alignment and simple mounting on a base is required. MR Accesorios Industriales sells this line and advises you on choosing the right variant according to shaft diameter and load type. If you are looking for a replacement, send us the part number on WhatsApp and we will quote it.

The designation of these pillow blocks is read in blocks: the initial letters identify the family and the housing type, and the numbers that follow indicate the shaft diameter and size. Part numbers PL3U2M17N, PL3U2M20N and PL3U2M25N share the same structure and change the final number according to the shaft. That number is not an internal code: it is the reference you need to send us so we can give you the exact unit or its equivalent.

These pillow blocks appear in conveyors, belts, elevators, mixers, pumps and fans. In food, chemical, cement and aggregate plants they are chosen for their ability to absorb slight misalignments and combined loads. They are also used in material handling equipment and in process lines where foot mounting simplifies installation on metal structures or concrete bases. In Argentina, they are common in feed plants, mills and aggregate processing plants.

To select the pillow block, take into account the shaft diameter, the load type (radial, axial or combined) and the environmental conditions. If there is dust, water or frequent washdowns, a variant with reinforced sealing is advisable. Mounting requires a flat base, a firm fit and alignment with the shaft; poor alignment shortens bearing life. Lubrication must be the one specified by the manufacturer and renewed according to the duty cycle. The pillow housing makes replacement easier without disassembling the entire equipment.

LINK-BELT pillow blocks are interchangeable with other brands that use the same pillow block mounting nomenclature, as long as the shaft diameter, the locking type and the base dimensions match. It is not enough for the part number to look similar: the center height, the mounting hole and the locking system must be verified. If you send us the original part number, we will indicate the compatible alternative.

If you need a pillow block for your equipment, write to us on WhatsApp with the part number or model shown on the nameplate. At MR Accesorios Industriales we will quote you shortly and help you solve the installation. We can also advise you on sealing, lubrication and mounting so that the pillow block works under the best conditions.